为了研究当风流经时不同地形对风力发电机塔筒的影响，以内蒙古白云鄂博地区的锥形塔筒风力发电机为研究对象，利用ANSYS有限元软件建立了塔筒分别位于坡度为15°、30°、45°山坡上的模型，通过分析风流经山坡时塔筒周围的风压系数分布情况推导出了风压值在平地与山区之间以及不同坡度山坡之间的关系，得到了锥型塔筒结构周围流场的变化特征和爬坡增值系数的建议取值。分析表明，风压和风速会随坡度增加而增大，且塔筒表面风压系数在迎风面分布较密在背风面分布较疏，并在0°位置处出现最大正风压系数，在侧面90°和270°位置处出现最小负风压系数。本文研究结果可为今后在不同地貌上风力发电机的设计与研究提供参考。%In order to study the influence of different terrain on wind power generator when wind come through,and take the wind power generators of Baiyunebo,in Inner Mongolia,as study object. The models of the wind turbine tower on the slopes of 15 ° ,30 ° ,45 ° are established by ANSYS finite element software,the relationship of wind pressure value between plains and mountains is deduced by the distribution of wind pressure coefficient around the tower when winds come through, the characteristics of the flow field around the tower and the recommended value of climbing increment coefficient are obtained. By analysis,wind pressure and wind speed will increase with the increase of slope,and on the surface of the tower,the wind pressure coefficients distribution in the windward side is more dense than the leeward side,the maximum positive pressure coefficients locate in the 0° position,and the minimum negative wind pressure coefficient locate in the 90°and 270° positions on the side. The research results will provide a reference for the design of the wind power generator on different landforms.
展开▼
