首页> 中文期刊> 《钢铁研究学报:英文版》 >Extraction of iron and aluminum from high-iron bauxite by ammonium sulfate roasting and water leaching

Extraction of iron and aluminum from high-iron bauxite by ammonium sulfate roasting and water leaching

         

摘要

High iron content is one of the challenges in utilizing the refractory bauxites in China. An improved method for treating the high-iron bauxite by roasting with (NH4)2SO4 was proposed, which offers a possible alternative method for utilizing the high-iron bauxite. The influences of the roasting time, roasting temperature, material ratio, and ore particle size on the extraction ratios of Fe and Al were studied, and the orthogonal test was used to optimize the reaction conditions. The optimized reaction conditions were proposed as follows: roasting temperature of 450 °C, roasting time of 120 min, material ratio of (NH4)2SO4 to ore of 2.5:1.0, and ore particle size below 80 jim. The roasting mechanism and kinetic parameters including the apparent activation energy and reaction rate constant were investigated. The results showed that the control step of the roasting process was the internal diffusion on the product layer and the apparent activation energy was 19.22 kJ mol-1 in the reaction temperature range. The kinetic equation was obtained finally.

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号