以某机场新建航站楼为例,分别采用“高峰小时法”和“人员密度法”计算人员数量.通过对比分析可知,采用两种计算方法计算得到的人员数量基本相当,“高峰小时法”结果较为保守且计算方法简便.基于分析,建议航站楼公共区的人员荷载计算采用“高峰小时法”并提供了相关设计参数.%Taking a new airport terminal as an example, "peak hour method" and "occupant density" method were used to calculate the numbers of occupants evacuated from the airport terminal. The result of the comparative analysis showed that the number of occupants calculated through two kinds of calculation method were more or less the same. The result from the "Peak hour method" was more conservative and the calculation was quite simple. Based on the analysis, it was suggested that the occupant density of the public area should be calculated using the " peak hour method". Some related design parameters were provided.
展开▼