Objective For the inverters used in UPS, it is important to maintain the pure sinusoidal AC output voltage waveform over all loading conditions and transients. Methods A novel sinusoidal output voltage control strategy is pregented in this paper. The output voltage is controlled by introducing filtering eapacitor current feedback. Two simple PI regulators are used for the current and voltage control loops. Results With the new control strategy, the inverter achieves very low output voltage distortion, good output voltage regulation and strong perturbation rejection, fast dynamic response, and good performance under nonlinear loads. The THD under capacitance rectifying load is better than 0.2%, the output voltage regulation within 0 to full load is less than 0.1%. The resting time under load transient is within 200μs. Conclusion The merits of the new control strategy include rapid response and good steady state stiffness.
展开▼