This paper introduces the working principle and structural characteristics of telescopic cantilever,and optimizes and improves its design on the basis of the gear and rack telescopic device,then uses synchronous belt drive and motor drive to achieve the three-stage linear telescopic movement of lifting arm,thus not only greatly improving the lifting speed and height and compact structure,but also acting for environmental protection and low cost.The Creo software is used to model the telescopic cantilever.It lays the foundation for the further optimization of the structure.%介绍了一种新型物流装载运输用的起吊推车,以及其伸缩悬臂的工作原理及结构特点.设计在齿轮齿条伸缩装置的基础上进行了优化改进,采用同步带传动机构,电机驱动,实现了起吊悬臂的三级直线差动伸缩运动,不仅提高了起吊悬臂的伸缩速度和起吊高度,而且结构紧凑、方便环保、成本低.利用Creo软件,对伸缩悬臂进行三维建模,为下一步优化结构打下了基础.
展开▼
机译:带有可动短臂的挖掘机等-在后面的旋转范围AB处的面向抓爪的侧面具有松动元件AB DE4218502A在短臂(2)的自由端装有一个工作元件(4),相对于该抓手的对面装有抓爪(6)。工作元件可在悬臂上旋转并且可停在每个相应的位置。抓爪独立于工作元件枢转地安装在其旋转平面上。抓爪被往复驱动w.r.t.工作元素。悬臂在与抓爪相反的一侧具有一个松动元件(8),该元件伸入抓爪的旋转范围内。首选松开元件具有渐缩的切削刃。使用/优点-对于重土工作,应使用在起吊过程中松开挖出的物料的设施。 AN 93396177 TI隔热材料的制造方法-使用额外的工艺均匀混合结合剂和隔热材料,然后用CO2气体冲洗