首页> 中文期刊> 《材料导报》 >焙烧温度对污泥陶粒烧胀过程及结构特征的影响

焙烧温度对污泥陶粒烧胀过程及结构特征的影响

         

摘要

按质量比为m(污泥):m(盐渍土):m(蒙脱土)=75:20:5的配比,将料球分别烧至1000℃、1050℃、1100℃和1150℃,研究了焙烧温度对污泥陶粒烧胀过程和结构特征的影响.结果表明,1100℃时陶粒的主晶相是石英、蓝晶石和钙长石,1150℃时陶粒的主晶相是莫来石、石英和蓝晶石.莫来石是由蓝晶石转化而来,在高温时形成富硅铝和富钙的液相以及二液分相现象,最后生成莫来石、玻璃体和钙长石.陶粒烧胀的原因是在还原气氛下发生铁碳反应.陶粒内部形成玻璃体为主体,中间有莫来石增强相的结构,陶粒断面形成致密结构和均匀的封闭孔.%With the mass ratio of sludge:saline soil:montmorillonite being 75:20:5,the effect of calcina-tion temperature (1000 ℃,1100 ℃,1050 ℃ and 1150 ℃)on the sintering process and structural characteristics of sludge ceramsite was studied.Results showed that quartz,kyanite and anorthite were the main crystalline phases of ceramsite at 1100 ℃,while the mullite,quartz and kyanite were those of ceramsite at 1150 ℃.Rich silicon aluminum from kyanite and rich calcium from liquid phase were transformed at high temperature,which caused the dual-liquid-phase separation phenomenon.Meanwhile,kyanite was transformed into mullite,and in the end,mullite,vitreous and anorthite were produced.The reason of the burning expansion of the ceramic is the iron carbon reaction under the reduction atmosphere.A compacted structure of ceramsite with a few mullite reinforcing phases can be found in the glass phase,and the uniform and closed pores are formed in ceramsite section.

著录项

  • 来源
    《材料导报》 |2016年第6期|125-128|共4页
  • 作者单位

    天津城建大学材料科学与工程学院,天津 300384;

    天津市建筑垃圾与燃煤废弃物利用技术工程中心,天津 300384;

    天津市软土特性与工程环境重点实验室,天津 300384;

    天津城建大学材料科学与工程学院,天津 300384;

    河南省建筑科学研究院,郑州 450053;

    天津城建大学材料科学与工程学院,天津 300384;

    天津市建筑垃圾与燃煤废弃物利用技术工程中心,天津 300384;

    天津市软土特性与工程环境重点实验室,天津 300384;

    天津城建大学材料科学与工程学院,天津 300384;

    天津城建大学材料科学与工程学院,天津 300384;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 X704;
  • 关键词

    城市污泥; 陶粒; 焙烧; 微观结构;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号