首页> 中文期刊> 《材料导报》 >置氢对Ti-25Nb-10Ta-1Zr-0.2Fe合金室温组织和硬度的影响

置氢对Ti-25Nb-10Ta-1Zr-0.2Fe合金室温组织和硬度的影响

         

摘要

利用光学显微镜、X射线衍射和扫描电镜等手段,研究了固态气体渗氢后氢元素对新型β医用钛合金Ti-25Nb-10Ta-1Zr-0.2Fe的相组成、微观组织和硬度的影响.研究结果表明,570℃置氢空冷,置氢量为0.2%(质量分数),合金发生共析反应βH→αH+δ.置氢后合金表面和内部显微组织出现差异:在合金表面,δ氢化物呈现针状,从晶界处生长,尺寸差异较大;在合金内部,氢化物δ呈细小针状,长度小于1μm,以α针为中心平行向外生长.置氢后合金硬度未增强.%The hydrogenation experiments of Ti-25Nb-10Ta-lZr-0. 2Fe alloy - a new β-medical titanium alloy were investigated through gas-solid hydrogenation method, in order to study the influence of hydrogen. The influences on phase composition, microstructure evolution and hardness were investigated by the means of optical microscope (OP), X-ray diffraction (XRD) and scanning electron microscope (SEM). The results show that after hydrogenating at 570℃ , the hydrogen absorption is 0.2wt%. And in the next air cooling period, a eutectoid reaction occurs, Βh→ ΑH+δ. The surface and inner microstructures of hydrogenated alloy are different: the surface microstructure is consisted of abundant needle-like 8-hydrides growing from grain boundary whose sizes are obviously different, while inner microstructure is of vast weeny S-hydrides, which are parallelly growing outward to the needle-like crphase as the center. The hardness of the alloy does not increase through hydrogenation.

著录项

  • 来源
    《材料导报》 |2012年第24期|1-4|共4页
  • 作者单位

    中南大学材料科学与工程学院,长沙410083;

    中南大学有色金属材料科学与工程教育部重点实验室,长沙410083;

    中南大学材料科学与工程学院,长沙410083;

    中南大学有色金属材料科学与工程教育部重点实验室,长沙410083;

    湖南迈迪科新材有限公司,长沙410016;

    中南大学湘雅医学院附属第一医院,长沙410008;

    中南大学材料科学与工程学院,长沙410083;

    中南大学有色金属材料科学与工程教育部重点实验室,长沙410083;

    中南大学材料科学与工程学院,长沙410083;

    中南大学有色金属材料科学与工程教育部重点实验室,长沙410083;

    中南大学材料科学与工程学院,长沙410083;

    中南大学有色金属材料科学与工程教育部重点实验室,长沙410083;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 轻有色金属及其合金;
  • 关键词

    置氢; 新型β钛合金; Ti-25Nb-10Ta-1Zr-0.2Fe; 微观组织; 硬度;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号