首页> 中文期刊> 《粉末冶金材料科学与工程》 >管状α-Fe2O3的合成、表征及光学性质

管状α-Fe2O3的合成、表征及光学性质

         

摘要

The uniform rod-like precursor was synthesized successfully via a facile solvothermal method using anhydrous FeCl3 and dithizone as raw materials. Then, iron oxide tubes were obtained by calcination treatment of the rod-like precursors at 400 ℃ for 3 h. The results of X-ray diffraction (XRD) analysis and environmental scanning electron microscopy (ESEM) investigations show that the as-prepared products are pure Fe2O3 with hexagonal phase and tube-like morphology. The average diameter and length of the micro-tubes are about 2μm and 10~20μm, respectively. In additions, Fourier transform infrared (FT-IR) result demonstrates that some SO42−ions are adsorbed on the surfaces of the as-prepared iron oxide. Ultraviolet-Visible (UV-Vis) indicates that the maximum absorption wavelength is around 489 nm, the band gap absorption edge is around 566.2 nm, the indirect transition and direct transition band gaps of the as-prepared iron oxide are 1.97 eV and 2.189 eV, which are close to the literature results.%  以无水FeCl3和双硫腙为原料,通过溶剂热法得到分散均匀的棒状含铁前驱体,将该前驱体在400℃煅烧3 h后制成管状氧化铁。X射线衍射仪(XRD)和环境扫描电镜(ESEM)的研究结果表明:所得管状氧化铁为六方相(α-Fe2O3)的一维微米管,其平均直径约为2μm、长度约为10~20μm。傅立叶变换红外光谱仪(FT-IR)所测数据表明,该产物氧化铁表面吸附有部分SO42−离子;而紫外−可见光谱仪(UV-Vis)的数据分析发现,其紫外最大吸收λmax约为489 nm,带宽吸收约在566.2 nm处,间接禁带宽度和直接禁带宽度分别为1.97 eV和2.189 eV,与文献报道值接近。

著录项

  • 来源
    《粉末冶金材料科学与工程》 |2013年第1期|113-118|共6页
  • 作者单位

    陕西科技大学 化学与化工学院;

    西安710021;

    教育部轻化工助剂化学与技术重点实验室 陕西科技大学;

    西安 710021;

    陕西科技大学 化学与化工学院;

    西安710021;

    教育部轻化工助剂化学与技术重点实验室 陕西科技大学;

    西安 710021;

    陕西科技大学 化学与化工学院;

    西安710021;

    教育部轻化工助剂化学与技术重点实验室 陕西科技大学;

    西安 710021;

    陕西科技大学 化学与化工学院;

    西安710021;

    教育部轻化工助剂化学与技术重点实验室 陕西科技大学;

    西安 710021;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 无机化学反应过程;
  • 关键词

    α-Fe2O3微米管; 溶剂热; 一维材料; 紫外性质;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号