首页> 中文期刊> 《矿产综合利用》 >安徽某钼矿浮选工艺研究

安徽某钼矿浮选工艺研究

         

摘要

Directed at the properties of a molybdenum ore in Anhui, an experimental research on floatation technology was carried out.For its characteristics of uneven dissemination and being difficult to liberate, the technological flowsheet of Mo -S bulk flotation was adopted under the condition of the grinding fineness of -0.074mm75% and water glass used to depress the slime and gangue.Through the comparison of one - stage regrinding and five cleaning flotation with two - stage regrinding and five cleaning flotation, the result shows when the technological flowsheet of one - stage regrinding and cleaning flotation was adopted, the qualified molybdenum concentrate can be obtained.On the basis of optimizing all kinds of technological condition, the closed - circuit experiment was adopted by using the flowsheet of one roughing flotation - two scaveging flotation, coarse concentrate regrinding and six cleaning flotation,a qualified molybdenum concentrate of 50.3% Mu can be obtained with a recovery of 81.18%.%根据安徽某钼矿的矿石性质,进行了选矿试验研究.针对该辉钼矿嵌布不均匀、解离比较困难的特点,试验采用了粗选磨矿细度-0.074mm75%,水玻璃分散抑制矿泥脉石,钼硫混合浮选的工艺流程.粗精矿分别经过一段再磨和两段再磨后五次精选对比,结果表明,粗精矿采用一段再磨精选后便可获得合格钼精矿.在优化多种工艺条件的基础上进行了闭路试验,采用一粗二扫,粗精矿再磨,六次精选工艺便可获得钼品位50.30%、回收率81.18%的钼精矿.

著录项

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号