为能够在墨西哥某铜矿初步设计阶段为预估高效浓密机浓密面积提供依据,以FY3-10尾矿作为浓密试验机的给矿进料,通过标准的试验室絮凝沉降试验,开展尾砂絮凝沉降规律研究,确定不同给入尾矿浆浓度、不同絮凝剂用量条件下的尾矿沉降速度及底流浓度,从而优选出最优絮凝剂添加量.根据入料浓度28％、絮凝剂添加量20 g/t时的沉降曲线,建立沉降数学模型,利用Kynch理论,结合C-C法及T-F法,通过数值公式推导及图解法,预估了该矿山所需的高效浓密机浓密面积为5 014 m2,最终确定需要4台直径约40 m的高效浓密机对尾砂浆进行浓密.%In order to provide basis for estimating thickening area of high-efficient thickeners in the preliminary design phase of a copper mine in Mexico,this paper takes FY3-10 tailings as feed of thickening testing machine,researches flocculent settling law of tailings through a standard laboratoryscale flocculent settling test,and determines settling velocity of tailings and underflow concentration under the conditions of different concentrations of tailings slurry fed and different dosages of flocculants,thus selecting the optimum dosage of flocculants.A mathematical model of settlement is established according to the settlement curve with feed concentration 28％ and dosage of flocculants 20 g/t.By using Kynch theory,in combination with C-C method and T-F method,and through numerical formula derivation and graphic method,thickening area of high-efficient thickeners required for the mine is estimated to be 5 014 m2,and it is finally determined that 4 sets of high-efficient thickeners with diameter of about 40 m would be required for thickening of the tailings slurry.
展开▼
