• 主题
高级搜索  >
历史搜索 清空历史
首页> 中文期刊> 《核技术》 >CeO2/NaF吸附剂的制备及其对MoF6的吸附性能研究

CeO2/NaF吸附剂的制备及其对MoF6的吸附性能研究

         
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

Background: The fluoride volatility process has been developed to recover uranium from spent nuclear fuel. And the fluoride adsorption technique is usually applied in the purification and collection of UF6 during the fluoride volatility process.Purpose: This study aims to investigate the characteristics and sorption performance of a novel sorbent CeO2/NaF synthesized by doping NaF with CeF3.Methods: With polymer sodium carboxymethyl cellulose (CMC) as a binder and pore-forming agent, CeF3 and NaFwas mixed according to a mass ratio of 4:9:62, and then water were added (the ratio of CMC to water is 1:6). The porous CeO2/NaF adsorbent particles were prepared by a mixing, molding and sintering process. The characteristics and adsorption performance of the adsorbent particles were analyzed and characterized.Results: Specific surface area of CeO2/NaF was (0.84±0.04)m2·g−1, which was twice of NaF sorbent made under the same process. Porosity was 42.2%, which was larger than that of NaF sorbent. The initial adsorption rate of MoF6 on CeO2/NaF was much higher than that of NaF sorbent. The temperature zone for desorption of MoF6 from CeO2/NaF ranged from 150°C to 300°C, while there were two desorption zones for desorption of MoF6 from NaF sorbent, which varied from 100°C to 300°C and 350°C to 400°C, respectively. This phenomenon showed that CeO2 might stabilize Mo6+in MoF6. Conclusion: The physical properties of NaF could be changed by doping with CeO2, and its adsorption performance was also improved.%将作为粘结剂和造孔剂的高分子羧甲基纤维素钠(Carboxymethylcellulose, CMC)、CeF3和NaF按4：9：62的质量比例混合，再加一定量的水（CMC与水的比为1：6），通过混捏、成形和烧结等程序制得了一种新型的CeO2/NaF吸附剂颗粒。通过研究CeO2的掺杂对NaF吸附剂表观性质和吸附性能的影响发现：CeO2/NaF吸附剂的比表面积为(0.84±0.04) m2·g−1，是相同条件下制得的 NaF 吸附剂的两倍以上；孔隙率为42.2%，也优于NaF吸附剂；CeO2/NaF和NaF吸附剂对MoF6的饱和吸附容量相当，但CeO2/NaF吸附剂的初始吸附速率明显大于NaF吸附剂；吸附于CeO2/NaF吸附剂上的MoF6在150–300°C单个温度段解吸附，而吸附于NaF吸附剂上的MoF6在100–300°C和350–400°C两个温度段发生解吸，表明CeO2的引入在一定程度上起到了稳定MoF6的作用。在NaF吸附剂内掺杂CeO2可以改变NaF吸附剂部分表观性质，从而改善NaF的吸附性能。

著录项

  • 来源
    《核技术》 |2015年第10期|1-7|共7页
  • 作者

    李洒洒; 程治强; 李杨娟; 龙德武; 龚昱; 窦强; 吴明红; 李晴暖;

  • 作者单位

    上海大学上海 200444;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    上海大学上海 200444;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

    中国科学院上海应用物理研究所嘉定园区上海 201800;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 原子能技术的应用;
  • 关键词

    NaF; 吸附剂; CeO2掺杂; MoF6; 热重分析;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号