首页> 中文期刊> 《核技术》 >PN结型器件在氚钛片辐照下电输出性能

PN结型器件在氚钛片辐照下电输出性能

         

摘要

Two kinds of silicon PN junction device were made for irradiation by titanium tritide sources of different activities,and the electrical outputs were measured and analyzed.The results showed that the Isc(short circuit current),Voc (open circuit voltage) and Pnax(maximum power output)increased with the tritium content,but the increases were not proportional to the tritium content.The electrical properties were affected by doping concentration and junction depth of the devices.%用多片具有不同金属钛膜厚度和充氚量的氚钛片对两种单晶硅基PN结型器件进行了辐照,在线测量了它们的电输出性能并进行了定性分析.结果表明,在本文所采用的钛膜厚度和氚量级下,器件输出短路电流等随充氚量增加而小幅增大,但不成正比关系;器件的掺杂浓度、结深等结构参数对器件电输出性能影响较大.

著录项

  • 来源
    《核技术》 |2009年第8期|584-587|共4页
  • 作者单位

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

    中国工程物理研究院核物理与化学研究所,绵阳,621900;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 设计;
  • 关键词

    PN结; 氚钛片; 辐射伏特效应同位素电池; 电输出性能;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号