The microstructure features, martensitic transformation behavior and mechanical/functional properties of Ti–V–Al alloy were tailored by changing rare element Y content in the present investigation. The results showed that Y doping resulted in the grain refinement and formation of Y-rich phase mainly distributing along grain boundary in Ti–V–Al alloys. The martensitic transformation temperatures of Ti–V–Al alloys slightly increased due to the variation of matrix composition induced by the presence of Y-rich phase. The mechanical and functional properties of Ti–V–Al alloys doped moderate Y addition were significantly improved, which can be ascribed to grain refinement, solution strengthening and precipitation strengthening. The 1.0 at.%Y-doped Ti–V–Al alloy exhibited the highest ultimate tensile stress of 912 MPa and largest elongation of 17.68%. In addition, it was found that the maximum recoverable strain of 5.42% can be obtained in Ti–V–Al alloy with adding 1.0 at.%Y,under the pre-strain of 6% condition, which is enhanced by approximate 0.6% than that of Ti–V–Al alloy without Y addition.
展开▼
