首页> 中文期刊> 《热喷涂技术》 >Cr3+掺杂Al2O3陶瓷粉体火焰喷涂工艺探究

Cr3+掺杂Al2O3陶瓷粉体火焰喷涂工艺探究

         

摘要

通过不同能量输入的火焰喷涂工艺制备了Cr3+掺杂的Al2O3陶瓷涂层.采用扫描电镜、X射线衍射、拉伸试验机、荧光光谱仪等方法测试了涂层的微观形貌、孔隙率、相结构、结合强度及发光性能等.结果表明:在优化的火焰喷涂工艺参数下,制备的Cr3+:Al2O3涂层呈典型的层状结构,粉体颗粒熔化良好,Al和Cr元素分布均匀,涂层孔隙率的平均值为11.32%.涂层与基体的结合强度可达10.27Mpa.涂层相结构主要由α-Al2O3构成,仅含有少量的γ-Al2O3.在特定波长的光源激发下,涂层在694.32nm处的发射峰相对强度均大于25000,具有良好的发光性能.%Flame spray with different energy inputs were adopted to prepare the Cr3+ doped Al2O3ceramic coatings. The morphology, porosity, phase structure, adhesive strength and luminescence property were characterized by SEM,XRD,tensile testing machine and fluorescence spectrophotometer. The results showed that with the optimal flame spraying technological parameter, the Cr3+ doped Al2O3 coating exhibits stratified and compacted structure with a low porosity of 11.32% and well-distributed Al and Cr element. The Cr3+ doped Al2O3 powders were fully melted. Also, the adhesive strength of the coating is 10.27MPa and the principal phase structure of the coatings wasα-Al2O3. Under the specific wavelength light source excitation, emission peak of the Cr3+ doped Al2O3 coating locates in 694.32nm with a relative strong intensity of 25000 and exhibits good luminescence property.

著录项

  • 来源
    《热喷涂技术》 |2015年第3期|36-40|共5页
  • 作者单位

    北京矿冶研究总院,北京 100160;

    北京市工业部件表面强化与修复工程技术研究中心,北京 102206;

    特种涂层材料与技术北京市重点实验室,北京 102206;

    北京矿冶研究总院,北京 100160;

    北京市工业部件表面强化与修复工程技术研究中心,北京 102206;

    特种涂层材料与技术北京市重点实验室,北京 102206;

    北京矿冶研究总院,北京 100160;

    北京市工业部件表面强化与修复工程技术研究中心,北京 102206;

    特种涂层材料与技术北京市重点实验室,北京 102206;

    北京矿冶研究总院,北京 100160;

    北京市工业部件表面强化与修复工程技术研究中心,北京 102206;

    特种涂层材料与技术北京市重点实验室,北京 102206;

    东莞中子科学中心,东莞 523808;

    东莞中子科学中心,东莞 523808;

    东莞中子科学中心,东莞 523808;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 金属表面防护技术;
  • 关键词

    Cr3+掺杂; Al2O3粉体; 火焰喷涂; 发光;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号