为了实现森林的数字化、多功能、精准计测，该文研制了一种数字化多功能电子测树枪，该设备以 MEMS (micro-electro-mechanical systems)测角传感器、激光测距传感器、电子罗盘等主要硬件为基础，通过测量距离、倾角、磁方位角3个参数，基于三角函数原理，嵌入操作软件，实现了树高测量、林分平均高测量、株数密度测量、角规绕测、任意高度直径测量、基本测量6项功能.并将该设备在河南省、内蒙古等地林场进行了试验，试验结果表明，树高测量精度最高，达99.39%，林分平均高测量精度最低，为94.97%，其他功能精度都在95%以上，可以满足林业外业调查的需要.%Forest mensuration is one of the basics in forestry science and the related fields. In this paper, a new handheld digitalized and multi-functional electronic forest measurement gun was designed and implemented to achieve digitalization, multi-function and precise mensuration in forest field inventory. Used to measure distance, angle of inclination and magnetic azimuth, the instrument was built upon such hardware as MEMS (Micro-Electro-Mechanical Systems) angle measurement sensor, and distance measurement laser sensor, MCU (Micro Controller Unit), flash memory, LED (Liquid Crystal Display), micro button, and USB (Universal Serial Bus). The instrument, based on the trigonometric principle, and operational software embedded, helped to achieve six functions in terms of individual tree height measurement, stand height measurement, stand density measurement, angle gauge, diameter and corresponding height at free position measurement, and basic measurement. To validate these six functions,a series of experiments were conducted respectively in 30 sample areas in Henan Province and 20 sample areas in Inner Mongolia, China. Data analysis and comparison demonstrated the following findings. In terms of tree height measurement, the measurements deviation of the electronic forest measurement gun and the total station was between 0.2%-1.6%, with an average accuracy of 99.39%. The relative error of angle gauge mounted on the electronic forest measurement gun and the lever-type angle gauge (Type: wi70448) was 4.75%, with the average accuracy of 95.25%. The relative error of stand mean height measured by electronic forest measurement gun and by average sample tree determination method was 5.03%, with the average accuracy of 94.97%. Compared with the conventional manual measurement approach, the relative error of numbers per unit area measurement function was 3.89%, with the average accuracy of 96.11%. When the forest measurement gun was used to measure diameter and corresponding height at free position, the relative error of diameter measurement between the forest measurement gun and tape was 4.42%. The relative error of corresponding height measurements between the electronic forest measurement gun and the total station was 1.25%, and the results correspond well with forest measurements. Regarding basic measurement functions, the average error of inclination measurement was 8′24″ and the average error of slope distance measurement was 5.56 mm relative to total station. The average error of azimuth measurement was 27′36″ relative to the angle scale. of all the functions, the accuracy of stand height was the lowest, 94.97%, while the accuracy of other functions was all above 95%. The results indicate that the instrument is able to meet the requirements of forestry field inventory and planning.
展开▼
