首页> 外文期刊>中国有色金属学报(英文版) >Influence of coupling with calculation of phase diagrams on microsegregation forming simulation of Al-4.5Cu alloy
【24h】

Influence of coupling with calculation of phase diagrams on microsegregation forming simulation of Al-4.5Cu alloy

机译:相图耦合对Al-4.5%Cu合金微偏析形成模拟的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The effect of coupling with calculation of phase diagrams on microsegregation forming simulation was investigated. The traditional simplified phase diagram and calculated phase diagram were introduced into the numerical models respectively and simulation on microsegregation forming of the Al-4.5%Cu alloy ingot was also presented. The simulation results were both compared with the experiment results. The results show that the calculated sencondary arm spacing with these two kinds of phase diagram are almost the same because relationship between the coarsening model and the information of phase diagram is not close. The calculated eutectic phase volume fractions of different locations in the ingot coupled with different phase diagrams are discrepant. The calculated volume fractions are consistent with the experiment results when calculated phase diagram couples, but are far from the experiment results and obviously inacceptable when traditional simplified phase diagram couples. So, coupling with accurate calculated phase diagrams is very significant for microsegregation forming simulation since much information of the phase diagram is used in the models and it can improve the precision of simulation results.
机译:研究了相图的计算耦合对微观偏析形成模拟的影响。将传统的简化相图和计算出的相图分别引入到数值模型中,并对Al-4.5%Cu合金铸锭的微观偏析形成进行了仿真。仿真结果均与实验结果进行了比较。结果表明,这两种相图计算出的第二臂间距几乎相同,这是因为粗化模型与相图信息之间的关系不紧密。铸锭中不同位置的共晶相体积分数与不同相图的计算结果不一致。当计算相图耦合时,所计算的体积分数与实验结果一致,但是与实验结果相去甚远,并且当传统的简化相图耦合时,显然是不可接受的。因此,与精确计算的相图耦合对于微偏析形成模拟非常重要,因为在模型中使用了大量相图信息,可以提高模拟结果的精度。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号