A mathematic model of two-phase flow and a physical model of two-dimensional (2D) vertical section for the plate-type structured packing Mellapak 250.Y were set up and verified. The models were used to study the influence of packing’s surface microstructure on the continuity of liquid film and the amount of liquid holdup. Simulation results show that the round corner shape and micro wavy structure are favorable in remaining the continuity of liquid film and increasing the amount of liquid holdup. The appropriate liquid flow rate was determined by investigating different liquid loadings to obtain an unbroken liquid film on the packing surface. The pressure difference between inlet and outlet for gas phase allowed gas and liquid to flow countercurrently in a 2D computational domain. The direction change of gas flow occurred near the phase interface area.
展开▼
