• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国卫生研究院文献>Materials >Influence of Fiber Orientation on Single-Point Cutting Fracture Behavior of Carbon-Fiber/Epoxy Prepreg Sheets
【2h】

Influence of Fiber Orientation on Single-Point Cutting Fracture Behavior of Carbon-Fiber/Epoxy Prepreg Sheets

机译：纤维取向对碳纤维/环氧树脂预浸料薄板单点切割断裂行为的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The purpose of this article is to investigate the influences of carbon fibers on the fracture mechanism of carbon fibers both in macroscopic view and microscopic view by using single-point flying cutting method. Cutting tools with three different materials were used in this research, namely, PCD (polycrystalline diamond) tool, CVD (chemical vapor deposition) diamond thin film coated carbide tool and uncoated carbide tool. The influence of fiber orientation on the cutting force and fracture topography were analyzed and conclusions were drawn that cutting forces are not affected by cutting speeds but significantly influenced by the fiber orientation. Cutting forces presented smaller values in the fiber orientation of 0/180° and 15/165° but the highest one in 30/150°. The fracture mechanism of carbon fibers was studied in different cutting conditions such as 0° orientation angle, 90° orientation angle, orientation angles along fiber direction, and orientation angles inverse to the fiber direction. In addition, a prediction model on the cutting defects of carbon fiber reinforced plastic was established based on acoustic emission (AE) signals.
机译：本文旨在通过单点飞刀切割技术从宏观和微观两个角度研究碳纤维对碳纤维断裂机理的影响。本研究使用三种不同材料的切削刀具，即PCD（多晶金刚石）刀具，CVD（化学气相沉积）金刚石薄膜涂层硬质合金刀具和未涂层硬质合金刀具。分析了纤维取向对切削力和断裂形貌的影响，得出的结论是切削力不受切削速度的影响，但受纤维取向的影响很大。切割力在0/180°和15/165°的纤维方向上显示的值较小，但在30/150°的纤维方向上显示的值最大。研究了碳纤维在不同切割条件下的断裂机理，例如0°取向角，90°取向角，沿纤维方向的取向角和与纤维方向相反的取向角。此外，基于声发射信号建立了碳纤维增强塑料切削缺陷的预测模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号