首页> 美国卫生研究院文献>Materials >The Effect of Different Storage Media on Color Stability of Self-Adhesive Composite Resin Cements for up to One Year
【2h】

The Effect of Different Storage Media on Color Stability of Self-Adhesive Composite Resin Cements for up to One Year

机译:不同存储介质对自粘复合树脂水泥长达一年的颜色稳定性的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The aim of this study was to analyze the long-term color stability of eight self-adhesive composite resin cements (SACRCs) after storage in diverse media for up to one year. 480 discs (diameter: 12 mm/thickness: 1.0 ± 0.05 mm) were fabricated (n = 60/SACRC): (1) BeautyCem (BEA); (2) Bifix SE (BIF); (3) Clearfil SA Cement Automix (CLE); (4) RelyX Unicem 2 Automix (RXU); (5) SeT (SET); (6) SmartCem 2 (SMC); (7) SoloCem (SOC); and (8) SpeedCEM (SPC). After polishing, specimens were immersed in (a) red wine (RW); (b) curry-solution (CU); (c) cress-solution (CR); and (d) distilled water (DW) at 37 °C and measured after 7, 28, 90, 180, and 365 days for color differences (ΔE) and water absorption (WA). Non-aged specimens were used as baselines. After 365 days, all of the discs were polished and their ΔE was measured. Data were analyzed using Kolmogorov-Smirnov, partial-eta-squared/ηP2, 3-/1-way ANOVA with Tukey-HSD post-hoc test (α = 0.05). Significant differences occurred between all SACRCs for WA (p ≤ 0.003), except in RXU and in SET and in ΔE (p ≤ 0.002), except in SET and SPC. The significantly highest WA presented in SOC; the lowest showed in BEA. Significant ΔE differences and a decrease after polishing between all storage media were found (p < 0.001) with highest values for RW, followed by CU, CR, and DW. The lowest ΔE was measured for CLE, followed by SOC, BIF, RXU, BEA, SPC, SET, and SMC (p < 0.001) and increased significantly during aging. The highest ΔE decrease presented in BEA. SACRCs showed an increase in WA/ΔE within total aging time. Discoloration could not be removed completely by polishing. SACRCs need to be carefully selected for restorations in the esthetical zone with visible restoration margins. Polishing can significantly reduce the marginal discoloration.
机译:这项研究的目的是分析八种自粘复合树脂水泥(SACRC)在多种介质中保存长达一年后的长期颜色稳定性。制作了480片(直径:12mm /厚度:1.0±0.05mm)(n = 60 / SACRC):(1)BeautyCem(BEA); (2)Bifix SE(BIF); (3)Clearfil SA水泥自动混合料(CLE); (4)RelyX Unicem 2自动混音(RXU); (5)设置(SET); (6)SmartCem 2(SMC); (7)SoloCem(SOC); (8)SpeedCEM(SPC)。抛光后,将样品浸入(a)红酒(RW)中; (b)咖喱溶液(CU); (c)水芹溶液(CR); (d)37°C的蒸馏水(DW),在7、28、90、180和365天后测量色差(ΔE)和吸水率(WA)。未老化的标本用作基线。 365天后,对所有圆盘进行抛光,并测量其ΔE。使用Kolmogorov-Smirnov,偏η-平方/ηP 2 ,3- / 1-way ANOVA和Tukey-HSD事后检验(α= 0.05)分析数据。 WA的所有SACRC之间都存在显着差异(p≤0.003),除了RXU和SET中以及ΔE(p≤0.002)之外,SET和SPC除外。 SOC中出现的最高WA。在BEA中显示的最低。发现所有存储介质之间的ΔE差异显着且抛光后减小(p <0.001),其中RW值最高,其次是CU,CR和DW。 CLE的最低ΔE被测量,随后是SOC,BIF,RXU,BEA,SPC,SET和SMC(p <0.001),并且在老化过程中显着增加。在BEA中出现的最大ΔE降低。 SACRC在总老化时间内显示出WA /ΔE的增加。不能通过抛光完全消除变色。需要仔细选择SACRC,以在具有明显修复边缘的美学区域进行修复。抛光可以显着减少边缘变色。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号