• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国卫生研究院文献>Polymers >The High Density Polyethylene Composite with Recycled Radiation Cross-Linked Filler of rHDPEx
【2h】

The High Density Polyethylene Composite with Recycled Radiation Cross-Linked Filler of rHDPEx

机译：rHDPEx循环辐射交联填料的高密度聚乙烯复合材料

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

This article discusses the possibilities of using radiation cross-linked high density polyethylene (HDPEx) acting as a filler in the original high density polyethylene (HDPE) matrix. The newly created composite is one of the possible answers to questions relating to the processing of radiation cross-linked thermoplastics. Radiation cross-linked networking is—nowadays, a commonly used technology that can significantly modify the properties of many types of thermoplastics. This paper describes the influence of the concentration of filler, in the form of grit or powder obtained by the grinding/milling of products/industrial waste from radiation cross-linked high density polyethylene (rHDPEx) on the mechanical and processing properties and the composite structure. It was determined that, by varying the concentration of the filler, it is possible to influence the mechanical behaviour of the composite. The mechanical properties of the new composite—measured at room temperature, are generally comparable or better than the same properties of the original thermoplastic. This creates very good assumptions for the effective and economically acceptable, processing of high density polyethylene (rHDPEx) waste. Its processability however, is limited; it can be processed by injection moulding up to 60 wt %.
机译：本文讨论了在原始高密度聚乙烯（HDPE）基质中使用辐射交联高密度聚乙烯（HDPEx）作为填料的可能性。新创建的复合材料是与辐射交联热塑性塑料加工有关的问题的可能答案之一。如今，辐射交联网络是一种可以显着改变多种热塑性塑料性能的常用技术。本文描述了通过辐射交联高密度聚乙烯（rHDPEx）的产品/工业废料的研磨/碾磨获得的沙砾或粉末形式的填料浓度对机械和加工性能以及复合结构的影响。已经确定，通过改变填料的浓度，可以影响复合材料的机械性能。在室温下测得的新复合材料的机械性能通常与原始热塑性塑料的性能相当或更好。这为有效且经济上可接受的高密度聚乙烯（rHDPEx）废物的处理创造了很好的假设。但是，它的可加工性是有限的。它可以通过注塑成型加工达到60 wt％。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号