• 主题
高级搜索  >
历史搜索 清空历史
首页> 美国卫生研究院文献>Polymers >Toughening and Enhancing Melamine–Urea–Formaldehyde Resin Properties via in situ Polymerization of Dialdehyde Starch and Microphase Separation
【2h】

Toughening and Enhancing Melamine–Urea–Formaldehyde Resin Properties via in situ Polymerization of Dialdehyde Starch and Microphase Separation

机译：通过二醛淀粉的原位聚合和微相分离来增韧和增强三聚氰胺-尿素-甲醛树脂的性能

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The goal of this study is to employ bio-based dialdehyde starch (DAS), derived from in situ polymerization and the resultant microphase separation structure, to improve the strength of melamine–urea–formaldehyde (MUF) resin, as well as enhance the properties that affect its adhesive performance. Thus, we evaluated the effects of DAS on the chemical structure, toughness, curing behavior, thermal stability, and micromorphology of the MUF resin. Furthermore, the wet shear strength and formaldehyde emissions of a manufactured, three-layer plywood were also measured. Results indicate that DAS was chemically introduced into the MUF resin by in situ polymerization between the aldehyde group in the DAS and the amino group and hydroxymethyl group in the resin. Essentially, polymerization caused a DAS soft segment to interpenetrate into the rigid MUF resin cross-linked network, and subsequently form a microphase separation structure. By incorporating 3% DAS into the MUF resin, the elongation at break of impregnated paper increased 48.12%, and the wet shear strength of the plywood increased 23.08%. These improvements were possibly due to one or a combination of the following: (1) DAS polymerization increasing the cross-linking density of the cured system; (2) DAS modification accelerating the curing of the MUF resin; and/or (3) the microphase separation structure, induced by DAS polymerization, improving the cured resin’s strength. All the results in this study suggest that the bio-based derivative from in situ polymerization and microphase separation can effectively toughen and enhance the properties that affect adhesive performance in highly cross-linked thermosetting resins.
机译：这项研究的目的是采用源自原位聚合的生物基二醛淀粉（DAS）和由此产生的微相分离结构，以提高三聚氰胺-脲-甲醛（MUF）树脂的强度，并增强其性能。影响其粘合性能。因此，我们评估了DAS对MUF树脂的化学结构，韧性，固化行为，热稳定性和微观形貌的影响。此外，还测量了制造的三层胶合板的湿剪切强度和甲醛释放量。结果表明，通过DAS中的醛基与树脂中的氨基和羟甲基之间的原位聚合，将DAS化学引入到MUF树脂中。本质上，聚合导致DAS软链段互渗到刚性MUF树脂交联网络中，随后形成微相分离结构。通过在MUF树脂中加入3％的DAS，浸渍纸的断裂伸长率提高了48.12％，胶合板的湿剪切强度提高了23.08％。这些改进可能归因于以下一种或多种组合：（1）DAS聚合提高了固化体系的交联密度； （2）DAS改性加速了MUF树脂的固化；和/或（3）DAS聚合引起的微相分离结构，提高了固化树脂的强度。该研究中的所有结果表明，原位聚合和微相分离产生的生物基衍生物可以有效地增韧和增强影响高度交联的热固性树脂粘合性能的性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号