首页> 美国卫生研究院文献>Sensors (Basel Switzerland) >A Fusion Localization Method based on a Robust Extended Kalman Filter and Track-Quality for Wireless Sensor Networks
【2h】

A Fusion Localization Method based on a Robust Extended Kalman Filter and Track-Quality for Wireless Sensor Networks

机译:基于鲁棒扩展卡尔曼滤波和跟踪质量的无线传感器网络融合定位方法

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

As one of the most essential technologies, wireless sensor networks (WSNs) integrate sensor technology, embedded computing technology, and modern network and communication technology, which have become research hotspots in recent years. The localization technique, one of the key techniques for WSN research, determines the application prospects of WSNs to a great extent. The positioning errors of wireless sensor networks are mainly caused by the non-line of sight (NLOS) propagation, occurring in complicated channel environments such as the indoor conditions. Traditional techniques such as the extended Kalman filter (EKF) perform unsatisfactorily in the case of NLOS. In contrast, the robust extended Kalman filter (REKF) acquires accurate position estimates by applying the robust techniques to the EKF in NLOS environments while losing efficiency in LOS. Therefore it is very hard to achieve high performance with a single filter in both LOS and NLOS environments. In this paper, a localization method using a robust extended Kalman filter and track-quality-based (REKF-TQ) fusion algorithm is proposed to mitigate the effect of NLOS errors. Firstly, the EKF and REKF are used in parallel to obtain the location estimates of mobile nodes. After that, we regard the position estimates as observation vectors, which can be implemented to calculate the residuals in the Kalman filter (KF) process. Then two KFs with a new observation vector and equation are used to further filter the estimates, respectively. At last, the acquired position estimates are combined by the fusion algorithm based on the track quality to get the final position vector of mobile node, which will serve as the state vector of both KFs at the next time step. Simulation results illustrate that the TQ-REKF algorithm yields better positioning accuracy than the EKF and REKF in the NLOS environment. Moreover, the proposed algorithm achieves higher accuracy than interacting multiple model algorithm (IMM) with EKF and REKF.
机译:作为最重要的技术之一,无线传感器网络(WSN)集成了传感器技术,嵌入式计算技术以及现代网络和通信技术,这些已成为近年来的研究热点。定位技术是无线传感器网络研究的关键技术之一,在很大程度上决定了无线传感器网络的应用前景。无线传感器网络的定位错误主要是由非视距(NLOS)传播引起的,这种情况发生在诸如室内条件之类的复杂信道环境中。在NLOS的情况下,诸如扩展卡尔曼滤波器(EKF)之类的传统技术效果不理想。相比之下,健壮的扩展卡尔曼滤波器(REKF)通过将健壮的技术应用于NLOS环境中的EKF来获取准确的位置估计,同时会降低LOS的效率。因此,很难在LOS和NLOS环境中使用单个滤波器来实现高性能。本文提出了一种使用鲁棒扩展卡尔曼滤波器和基于轨道质量的融合算法(REKF-TQ)的定位方法,以减轻NLOS误差的影响。首先,将EKF和REKF并行使用以获得移动节点的位置估计。之后,我们将位置估计视为观察向量,可以将其用于计算卡尔曼滤波(KF)过程中的残差。然后,分别使用带有新观测向量和方程的两个KF分别进一步过滤估计。最后,通过融合算法基于轨道质量对获取的位置估计进行组合,得到移动节点的最终位置矢量,该位置矢量将在下一时间步用作两个KF的状态矢量。仿真结果表明,在非视距环境下,TQ-REKF算法比EKF和REKF具有更好的定位精度。此外,与将多模型算法(IMM)与EKF和REKF进行交互相比,所提出的算法具有更高的准确性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号