首页> 美国卫生研究院文献>Heliyon >Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting

【2h】

Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting

机译：选择性激光熔化制备的AlSi10Mg合金的溶质团簇和过饱和固溶体

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

摘要
著录项
相似文献
相关主题

摘要

α-Al grains surrounded by Al-Si eutectic as the substructures in AlSi10Mg alloy fabricated by selective laser melting (SLM) were investigated in detail using three-dimensional atom-probe and transmission electron microscopy. Quantitative analysis of α-Al revealed (1) the formation of Mg clusters and Mg-Si co-clusters with a density in the order of 10²³ /m³ in α-Al of the as-built state caused by the complicated thermal history, and (2) a supersaturated Si content that significantly exceeded the maximum solubility due to rapid solidification, during the SLM process.

机译：利用三维原子探针和透射电子显微镜，详细研究了通过选择性激光熔化（SLM）制备的AlSi10Mg合金中被Al-Si共晶包围的α-Al晶粒作为子结构。对α-Al的定量分析表明：（1）α中Mg团簇和Mg-Si共簇的形成密度为10 ^{23 / m ^{3 -由于复杂的热历史而形成的Al状态；以及（2）在SLM过程中，过饱和的Si含量由于快速凝固而大大超过了最大溶解度。}}

著录项

期刊名称 Heliyon
作者
Takashi Maeshima; Keiichiro Oh-ishi;
展开▼
作者单位

展开▼
年(卷),期 2019(5),2
年度 2019
页码 e01186
总页数 13
原文格式 PDF
正文语种
中图分类
关键词
Materials science Inorganic chemistry Metallurgical engineering;

机译：材料科学;无机化学;冶金工程;

相似文献

外文文献
中文文献
专利

1. 机械合金化与激光烧结制备铁锌过饱和固溶体及其降解行为研究 [J] . 杨友文, 蔡国庆, 沈理达, 中南大学学报（英文版） . 2021,第004期
2. Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting [J] . Han Quanquan, Jiao Yang The International Journal of Advanced Manufacturing Technology . 2019,第9a12期

机译：热处理和激光表面重熔对选择性激光熔化制造的Alsi10mg合金的影响
3. Supersaturated Solid Solution of Mg in Fe Produced by Mechanical Alloying Followed by Selective Laser Melting (SLM) to Accelerate Degradation for Biomedical Applications [J] . Shuai C-J, Li S., Gao C-D, Lasers in engineering . 2020,第4a6期

机译：通过机械合金化产生的Mg中的超饱和固溶体，然后选择性激光熔融（SLM）加速生物医学应用的降解
4. Effect of Heat Treatment on Microstructure and Mechanical Properties of AlSi10Mg Alloy Fabricated by Selective Laser Melting [J] . Peng Qi, Belong Li, Tongbo Wang, Materials science forum . 2021,第1期

机译：热处理对选择性激光熔化制备的Alsi10mg合金微观结构和力学性能的影响
5. Investigation of the Selective Laser Melting Process for AlSi10Mg and Al-Mg-Si alloys Fabricated at High Laser Power [C] . Michael Pires, Tzung Shin Guo, Wojciech Z. Misiolek, Additive Manufacturing with Powder Metallurgy Conference . 2019

机译：高激光功率制造的Alsi10mg和Al-Mg-Si合金选择性激光熔化过程的研究
6. Investigation of the Selective Laser Melting Process for AlSi10mg and Al-Mg-Si Alloys Fabricated at High Laser Power [D] . Pires, Michael. 2021

机译：高激光功率制造的Alsi10mg和Al-Mg-Si合金选择性激光熔化过程的研究
7. Performance Consistency of AlSi10Mg Alloy Manufactured by Simulating Multi Laser Beam Selective Laser Melting (SLM): Microstructures and Mechanical Properties [O] . Bin Liu, Zezhou Kuai, Zhonghua Li, 2018

机译：通过模拟多激光束选择性激光熔化（SLM）制造的AlSi10Mg合金的性能一致性：微观组织和力学性能
8. Effect of the Distance from Build Platform and Post-Heat Treatment of AlSi10Mg Alloy Manufactured by Single- and Multi-Laser Selective Laser Melting [O] . Emanuela Cerri, Emanuele Ghio, Giovanni Bolelli 2021

机译：通过单次和多激光选择性激光熔化制造的构建平台和铝合金后距离和热处理的影响

Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting

摘要

著录项

相似文献

相关主题

期刊订阅