首页> 外文期刊>Composite Structures >Influence of laminate code and curing process on the stability of square cross-section, composite columns - Experimental and FEM studies
【24h】

Influence of laminate code and curing process on the stability of square cross-section, composite columns - Experimental and FEM studies

机译:层压码及固化过程对方横截面稳定性,复合柱 - 实验和有限元研究的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The objective of this research is to investigate the influence of the laminate code and autoclaving process parameters on the buckling and post-buckling behaviour of thin-walled, composite profiles with square cross-section. A compression of profiles with the following dimensions was investigated: (width x height x thickness) 80 mm x 80 mm x 1.2 mm and length equal to 240 mm. The laminates were cured in two autoclaving processes: the nominal process on an empty aluminium mandrel and slow curing process on a full aluminium mandrel. Five different laminate codes were inspected - two symmetric and three anti symmetric ones with respect to the midplane of the laminate. In total, 40 samples were inspected. The results were compared with two FE models. The first did not include the residual stresses in the material while the second did. A comparison of experimental data with the results of FE modelling proves that residual stresses significantly contribute in the buckling and post-buckling behaviour of thin-walled laminated structures with closed cross-section. Their occurrence has a positive effect on the stability of the columns. The study also covers the discussion about the failure loads of the considered columns.
机译:该研究的目的是研究层压码和高压灭菌过程参数对薄壁,复合型材的屈曲和后屈曲行为,方形横截面的影响。研究了具有以下尺寸的曲线的压缩:(宽度x高x厚度)80mm x 80 mm x 1.2 mm,长度等于240 mm。层压板在两个高压灭菌过程中固化:在空铝心轴上的标称过程和全铝心轴上的慢固化过程。检查五种不同的层压码 - 相对于层压板中间平面的两个对称和三个抗对称。总共检查了40个样品。结果与两个FE模型进行了比较。第一个不包括材料中的残余应力,而第二种。实验数据与Fe造型结果的比较证明,残留应力在封闭横截面的薄壁层压结构的屈曲和后屈曲行为中显着贡献。它们的发生对柱的稳定性产生了积极影响。该研究还包括关于所考虑的列的故障负载的讨论。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号