首页> 外文期刊>International Journal of Electrochemical Science >Yttrium Selective Poly(Vinyl) Chloride Sensor Based on Derivative of 2-Amino-1,4-Naphthoquinone
【24h】

Yttrium Selective Poly(Vinyl) Chloride Sensor Based on Derivative of 2-Amino-1,4-Naphthoquinone

机译:基于2-氨基-1,4-萘醌衍生物的钇选择性聚氯乙烯传感器

获取原文
           

摘要

The ligand (ionophores H) based on 2-amino-1,4-naphthoquinone have been synthesized and exploredas neutral ionophores for preparing polyvinyl chloride-based membrane sensor for the determination ofyttrium(III). During the optimization, the addition of potassium tetrakis(4-chlorophenyl) borate andvarious plasticizers, viz., o-NPOE, DBP, DBBP, DOP and CN have improved performance of thesensors. The best performance was obtained with the sensor number 8, with composition (%,w/w)ionophore H (3.5%): PVC (30.0%): o-NPOE (63.0%): KTpClPB (3.5%). This sensor exhibits Nernstian response with slope 19.8 mV/decade of activity in the concentration range 2.310 to 1.010 M yttrium (III), performs satisfactorily over wide slight acidic pH range of (2.5.5) with afast response time (12 s). The sensor was also found to work satisfactorily in partially non-aqueousmedia up to 20% (v/v) content of acetonitrile, ethanol and methanol. The proposed sensor can be usedover a period of 2.5 months without significant drift in potentials. The quantitative application ofsensor number 8 was also evaluated in comparative analysis of yttrium(III) with Flame-AAS.
机译:合成了基于2-氨基-1,4-萘醌的配体(离子载体H),并探索了中性离子载体用于制备聚氯乙烯测定钇(III)的膜传感器。在优化过程中,添加四(4-氯苯基)硼酸钾钾和各种增塑剂,即邻-NPOE,DBP,DBBP,DOP和CN,可改善传感器的性能。传感器编号8的最佳性能是由离子载体H(3.5%):PVC(30.0%):o-NPOE(63.0%):KTpClPB(3.5%)组成(%,w / w)。该传感器在2.310至1.010 M钇(III)浓度范围内表现出坡度为19.8 mV /活性的十年的Nernstian响应,在较弱的酸性pH范围(2.5.5)内具有令人满意的性能,响应时间短(12 s)。还发现该传感器在部分非水介质中的乙腈,乙醇和甲醇含量高达20%(v / v)时也能令人满意地工作。所建议的传感器可以使用2.5个月,而电位没有明显的漂移。在火焰-AAS对钇(III)的比较分析中,还评估了8号传感器的定量应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号