...
  • 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>International Journal of Technology >Development of A Matlab Software For Real-Time Mapping of Electric Fields on Transmission Power Line
【24h】

Development of A Matlab Software For Real-Time Mapping of Electric Fields on Transmission Power Line

机译：Matlab软件对输电线路电场实时映射的开发

获取原文
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

The main contribution of this article is the mapping of the electric fields in transmission power lines using the Charge Simulation Method (CSM), combined with an embedded system. In this research, a computational routine was written in MATLAB?. The electric field intensity is calculated at a 1 meter height on right-of-way and between towers. The mapping is performed for a space between towers and considers that the maximum arrow of the conductors occurs in the middle of this distance, what provides a computational result where the profile of the electric field can be analyzed. The bundle conductor height varies along the distance between towers in order to improve the values of the calculated field. The results can be seen in different graphics (three-dimensional, bi-dimensional, a slice of the field and others). Charge Simulation Method is a power tool for calculating intensity field of high voltage systems, so this is a motivation for the use of the method. A series of detectors are used to obtain the data of the voltage that is provided to the load. These data are captured by a microcontroller and transmitted to the operational center. Using this data, the measure of the field is possible.
机译：本文的主要贡献是使用电荷模拟方法（CSM）结合嵌入式系统对传输电力线中的电场进行映射。在这项研究中，计算例程是用MATLAB？编写的。在右侧和塔之间的1米高处计算电场强度。对塔之间的空间进行映射，并认为导体的最大箭头出现在该距离的中间，这提供了可以分析电场分布的计算结果。束导体高度沿塔架之间的距离变化，以提高计算场的值。结果可以在不同的图形中看到（三维，二维，一片视场等）。电荷模拟方法是用于计算高压系统强度场的动力工具，因此这是使用该方法的动机。一系列检测器用于获取提供给负载的电压数据。这些数据由微控制器捕获并传输到运营中心。使用此数据，可以测量该字段。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号