• 主题
高级搜索  >
历史搜索 清空历史
首页> 外文期刊>Energy Harvesting and Systems >Experimental Characterisation and Finite-element Simulations of a Thermoelectric Generator with Ceramic p-type Ca3Co4O9 and Metallic n-type Cu0.57Ni0.42Mn0.01 Legs
【24h】

Experimental Characterisation and Finite-element Simulations of a Thermoelectric Generator with Ceramic p-type Ca3Co4O9 and Metallic n-type Cu0.57Ni0.42Mn0.01 Legs

机译：陶瓷p型Ca 3 Co 4 O 9 和金属n型Cu <的热电发生器的实验表征和有限元模拟sub> 0.57 Ni 0.42 Mn 0.01 腿

获取原文
           
页面导航
  • 摘要
  • 著录项
  • 相似文献
  • 相关主题

摘要

This study presents the characterisation of a prototype thermoelectric generator including ceramic Ca3Co4O9 p-type and metallic Cu0.57Ni0.42Mn0.01 n-type legs. The generator was constructed applying the conventional rigid chessboard design, which provides an electrical series connection of the thermoelectrically active materials in between of two electrical isolating cover plates made of alumina. Ag-epoxy resin was used for electric connectors which were directly bond to the thermoelectrically active materials. The generator was rebuild in the framework of a finite-element model to simulate the generator’s transport characteristics using the physical data of the single materials as input parameters for the simulation tool. The simulation results give a view to the distributions of temperature and electric potential as well as vector plots showing the generated current density of charge inside the regarded materials. The finite-element simulation tool was used to consider the electrical contact resistivities between the thermoelectric legs and the connector material. The input parameter for the specific isothermal electric resistivity of the Ag-epoxy connectors were varied by including the electrical contact resistances to match the simulated to the measured data in order to receive the correct electric current densities in the modeled device.
机译：这项研究介绍了原型热电发电机的特性，包括陶瓷Ca3Co4O9 p型和金属Cu0.57Ni0.42Mn0.01 n型支脚。该发电机采用常规的刚性棋盘设计构造而成，该设计在两个由氧化铝制成的电绝缘盖板之间提供热电活性材料的电串联连接。 Ag-环氧树脂用于直接连接到热电活性材料上的电连接器。在有限元模型的框架内对发生器进行了重建，以使用单一材料的物理数据作为模拟工具的输入参数来模拟发生器的运输特性。仿真结果可以查看温度和电势的分布，以及可以显示所考虑材料内部电荷的电流密度的矢量图。使用有限元仿真工具来考虑热电腿和连接器材料之间的电接触电阻率。 Ag-环氧树脂连接器的特定等温电阻率的输入参数通过包括电接触电阻以使模拟量与测量数据匹配来改变，以便在建模的设备中接收正确的电流密度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

  • 客服微信

  • 服务号