首页> 外文期刊>RSC Advances >Rechargeable aluminum batteries: effects of cations in ionic liquid electrolytes
【24h】

Rechargeable aluminum batteries: effects of cations in ionic liquid electrolytes

机译:可充电铝电池:阳离子在离子液体电解质中的作用

获取原文
           

摘要

Room temperature ionic liquids (RTILs) are solvent-free liquids comprised of densely packed cations and anions. The low vapor pressure and low flammability make ILs interesting for electrolytes in batteries. In this work, a new class of ionic liquids were formed for rechargeable aluminum/graphite battery electrolytes by mixing 1-methyl-1-propylpyrrolidinium chloride (Py13Cl) with various ratios of aluminum chloride (AlCl _(3) ) (AlCl _(3) /Py13Cl molar ratio = 1.4 to 1.7). Fundamental properties of the ionic liquids, including density, viscosity, conductivity, anion concentrations and electrolyte ion percent were investigated and compared with the previously investigated 1-ethyl-3-methylimidazolium chloride (EMIC-AlCl _(3) ) ionic liquids. The results showed that the Py13Cl–AlCl _(3) ionic liquid exhibited lower density, higher viscosity and lower conductivity than its EMIC-AlCl _(3) counterpart. We devised a Raman scattering spectroscopy method probing ILs over a Si substrate, and by using the Si Raman scattering peak for normalization, we quantified speciation including AlCl _(4) ~(?) , Al _(2) Cl _(7) ~(?) , and larger AlCl _(3) related species with the general formula (AlCl _(3) ) _( n ) in different IL electrolytes. We found that larger (AlCl _(3) ) _( n ) species existed only in the Py13Cl–AlCl _(3) system. We propose that the larger cationic size of Py13 ~(+) (142 ? ~(3) ) versus EMI ~(+) (118 ? ~(3) ) dictated the differences in the chemical and physical properties of the two ionic liquids. Both ionic liquids were used as electrolytes for aluminum–graphite batteries, with the performances of batteries compared. The chloroaluminate anion-graphite charging capacity and cycling stability of the two batteries were similar. The Py13Cl–AlCl _(3) based battery showed a slightly larger overpotential than EMIC-AlCl _(3) , leading to lower energy efficiency resulting from higher viscosity and lower conductivity. The results here provide fundamental insights into ionic liquid electrolyte design for optimal battery performance.
机译:室温离子液体(RTIL)是不含溶剂的液体,由密集堆积的阳离子和阴离子组成。低蒸气压和低易燃性使IL对于电池中的电解质很有趣。在这项工作中,通过将1-甲基-1-丙基吡咯烷氯化氯(Py13Cl)与各种比例的氯化铝(AlCl _(3))(AlCl _(3)混合,形成了用于可再充电铝/石墨电池电解质的新型离子液体。 )/ Py13Cl摩尔比= 1.4至1.7)。研究了离子液体的基本特性,包括密度,粘度,电导率,阴离子浓度和电解质离子百分比,并将其与先前研究的1-乙基-3-甲基咪唑鎓氯化物(EMIC-AlCl _(3))离子液体进行了比较。结果表明,与EMIC-AlCl _(3)相比,Py13Cl–AlCl _(3)离子液体具有更低的密度,更高的粘度和更低的电导率。我们设计了一种拉曼散射光谱法,在Si衬底上探测IL,并通过使用Si拉曼散射峰进行归一化,我们量化了AlCl _(4)〜(?),Al _(2)Cl _(7)〜 (?)和更大的AlCl _(3)相关物种,在不同的IL电解质中具有通式(AlCl _(3))_(n)。我们发现较大的(AlCl _(3))_(n)物种仅存在于Py13Cl–AlCl _(3)系统中。我们认为,Py13〜(+)(142?〜(3))比EMI〜(+)(118?〜(3))更大的阳离子尺寸决定了两种离子液体在化学和物理性质上的差异。两种离子液体均用作铝-石墨电池的电解质,并比较了电池的性能。两个电池的氯铝酸盐阴离子-石墨充电容量和循环稳定性相似。基于Py13Cl–AlCl _(3)的电池显示出比EMIC-AlCl _(3)稍大的过电势,由于较高的粘度和较低的电导率导致能量效率较低。此处的结果提供了有关离子液体电解质设计以实现最佳电池性能的基本见识。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号