首页> 外文期刊>RSC Advances >Graphene oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate layers on silver nanowire working electrodes enhance the power conversion efficiencies of dye-sensitized solar cells in a low temperature process
【24h】

Graphene oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate layers on silver nanowire working electrodes enhance the power conversion efficiencies of dye-sensitized solar cells in a low temperature process

机译:石墨烯氧化物/聚(3,4-乙二氧基噻吩):银纳米线工作电极上的聚苯乙烯磺酸盐层增强了低温过程中染料敏化太阳能电池的功率转化效率

获取原文
       

摘要

In this study, silver nanowire (AgNW) networks were applied, for the first time, as transparent conductive layers for the working electrodes of dye-sensitized solar cells (DSSCs). To avoid corrosion of the AgNWs by iodine in the electrolyte, graphene oxide (GO) was used as a protective layer that isolated the AgNWs from the electrolyte; the effective prevention of corrosion probably arose from electrostatic repulsion between the electrolyte and the charged surface of the protective layer. After incorporation of 25% poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) into the GO, the power conversion efficiency (PCE) of the resulting GO/PEDOT:PSS–AgNW DSSC improved by 324%. The PEDOT:PSS doping led to the work function of the GO from 5.63 to 5.24 eV. The result may be because of decreasing the strength of the C–O dipole moment of the GO. The enhanced PCE can be attributed to the lower Schottky barrier between the AgNWs and the GO, due to the decreased work function of the GO.
机译:在该研究中,首次应用银纳米线(AGNW)网络,作为染料敏化太阳能电池(DSSCs)的工作电极作为透明导电层。为避免在电解质中通过碘的碘腐蚀,将石墨烯(GO)用作从电解质中分离AgNW的保护层;有效预防腐蚀可能从电解质和保护层的带电表面之间的静电排斥产生。掺入25%聚(3,4-亚乙二氧基噻吩):聚苯乙烯磺酸盐(PEDOT:PSS)进入GO,所得GO / PEDOT的电力转换效率(PCE):PSS-AGNW DSSC提高了324%。 PEDOT:PSS掺杂导致从5.63到5.24eV的工作功能。结果可能是因为降低了GO的C-O偶极力矩的强度。由于GO的工作函数减少,增强的PCE可归因于AGNW和GO之间的较低肖特基势垒。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号