...
首页> 外文期刊>Brazilian Journal of Food Technology >Otimiza??o da desidrata??o osmótica de coco precedida de tratamento com microondas empregando Metodologia de Superfície de Resposta
【24h】

Otimiza??o da desidrata??o osmótica de coco precedida de tratamento com microondas empregando Metodologia de Superfície de Resposta

机译:使用响应表面方法的微波处理前面的脱水椰子渗透性优化

获取原文
           

摘要

Osmotic dehydration is an intermediate stage in drying processes in which water is extracted using a hypertonic solution, but it is a slow process, especially in hard foods such as coconut. Microwaves use an electromagnetic field which can raise the temperature in the depth of samples as a result of friction, which facilitates mass transfer due to molecular expansion and increased porosity. The aim of this study was to investigate the effect of a microwave pre-treatment on the quality of the osmotic drying of coconut and optimize the whole process by response surface methodology (RSM). The independent variables were the microwave power (X1), the sugar solution concentration (X2) and the duration of the process (X3.). The responses (dependent variables) were the moisture content difference (MD), weight reduction (WR), water loss (WL) and solids gain (SG). The results showed that the linear terms of X2and X3 had significant effects on all the dependent variables but the linear term of X1 only significantly affected WL, SG and WR (p 0.05). The interaction of X1X2 significantly affected WL and WR and the interaction of X2X3 significantly affected all the dependent variables, but the interaction of X1X3 only significantly affected MD (p 0.05). On the other hand, X22 significantly affected SG and WR (p 0.05). The two-factor model (2FI) was able to express the changes in MD and WL, but only the quadratic model adequately fitted SG and WR, the determination coefficients being 0.98, 0.99, 0.99 and 0.99 respectively. Finally, the optimized condition was obtained with a power of 900 watts, concentration of 47.80% and duration of 5 hours.
机译:渗透脱水是在干燥过程中的中间阶段,其中使用高渗溶液提取水,但它是一种缓慢的过程,尤其是在椰子等硬食物中。微波使用电磁场,其可以由于摩擦而升高样品深度的温度,这促进了由于分子膨胀和孔隙率增加的传质。本研究的目的是探讨微波预处理对椰子渗透干燥质量的影响,并通过响应面方法(RSM)优化整个过程。独立变量是微波功率(X1),糖溶液浓度(X2)和方法的持续时间(X3。)。响应(依赖变量)是水分含量差(MD),重量减少(WR),水分损失(WL)和固体增益(SG)。结果表明,X2和X3的线性术语对所有依赖变量具有显着影响,但X1的线性项仅受到显着影响的WL,SG和WR(P <0.05)。 X1X2的相互作用显着影响WL和WR和X2X3的相互作用显着影响了所有依赖变量,但X1X3的相互作用仅为显着影响MD(P <0.05)。另一方面,X22显着影响SG和WR(P <0.05)。双因素模型(2FI)能够表达MD和WL的变化,而是只有二次模型充分拟合SG和WR,测定系数分别为0.98,0.99,0.99和0.99。最后,获得优化的条件,功率为900瓦,浓度为47.80%,持续时间为5小时。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号