...
首页> 外文期刊>Environmental Science & Technology >Optimization of coagulation-flocculation process for palm oil mill effluent using response surface methodology
【24h】

Optimization of coagulation-flocculation process for palm oil mill effluent using response surface methodology

机译:响应面法优化棕榈油厂废水混凝絮凝工艺

获取原文
获取原文并翻译 | 示例
           

摘要

The coagulation-flocculation process incorporated with membrane separation technology will become a new approach for palm oil mill effluent (POME) treatment as well as water reclamation and reuse. In our current research, a membrane pilot plant has been used for POME treatment where the coagulation-flocculation process plays an important role as a pretreatment process for the mitigation of membrane fouling problems. The pretreated POME with low turbidity values and high water recovery are the main objectives to be achieved through the coagulation-flocculation process. Therefore, treatment optimization to serve these purposes was performed using jar tests and applying a response surface methodology (RSM) to the results. A 23 full-factorial central composite design (CCD) was chosen to explain the effect and interaction of three factors: coagulant dosage, flocculent dosage, and pH. The CCD is successfully demonstrated to efficiently determine the optimized parameters, where 78% of water recovery with a 20 NTU turbidity value can be obtained at the optimum value of coagulant dosage, flocculent dosage, and pH at 15 000 mg/L, 300 mg/L, and 6, respectively.
机译:结合膜分离技术的混凝-絮凝工艺将成为棕榈油厂废水(POME)处理以及水回收和再利用的新方法。在我们目前的研究中,膜中试设备已用于POME处理,其中絮凝-絮凝过程作为缓解膜结垢问题的预处理过程起着重要作用。低混浊度和高水回收率的预处理POME是通过混凝-絮凝工艺实现的主要目标。因此,使用广口瓶测试并针对结果应用响应面方法(RSM)进行了达到这些目的的处理优化。选择了23个全因子中心复合设计(CCD)来解释三个因素的作用和相互作用:凝结剂用量,絮凝剂用量和pH值。成功地证明了CCD可以有效地确定最佳参数,在15 000 mg / L,300 mg / L的最佳混凝剂剂量,絮凝剂剂量和pH值下,可以得到78%的水回收率(浊度值为20 NTU)。 L和6。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号