High Torque Density Transverse Flux Machine Without the Need to Use SMC Material for 3-D Flux Paths

Lu Kaiyuan; Wu Weimin

首页> 外文期刊>Magnetics, IEEE Transactions on >High Torque Density Transverse Flux Machine Without the Need to Use SMC Material for 3-D Flux Paths

【24h】

High Torque Density Transverse Flux Machine Without the Need to Use SMC Material for 3-D Flux Paths

机译：高扭矩密度横向磁通机，无需在3D磁通路径中使用SMC材料

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

This paper presents a new transverse flux permanent magnet machine. In a normal transverse flux machine, complicated 3-D flux paths often exist. Such 3-D flux paths would require the use of soft magnetic composites material instead of laminations for construction of the machine stator. In the new machine topology proposed in this paper, by advantageously utilizing the magnetic flux path provided by an additional rotor, use of laminations that allow 2-D flux paths only will be sufficient to accomplish the required 3-D flux paths. The machine also has a high torque density and is therefore an attractive solution for various direct drive applications.

机译：本文提出了一种新型的横向磁通永磁电机。在普通的横向磁通机中，通常存在复杂的3-D磁通路径。这种3-D磁通路径将需要使用软磁复合材料而不是用于构造电机定子的叠片。在本文提出的新的机器拓扑中，通过有利地利用附加转子提供的磁通路径，仅允许使用2-D磁通路径的叠片的使用就足以完成所需的3-D磁通路径。该机器还具有很高的扭矩密度，因此是各种直接驱动应用的有吸引力的解决方案。

著录项

来源
《Magnetics, IEEE Transactions on》 |2015年第3期|1-4|共4页
作者
Lu Kaiyuan; Wu Weimin;
展开▼
作者单位

Department of Energy Technology, Aalborg University, Aalborg, Denmark;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类
关键词
Lamination; Rotors; Soft magnetic materials; Stator windings; Torque; Windings; High torque density; laminations; transverse flux machine (TFM);

机译：叠片;转子;软磁材料;定子绕组;转矩;绕组;高转矩密度;叠片;横向磁通机（TFM）;

相似文献

外文文献
中文文献
专利

1. 3-D Finite Element Analysis of the Cogging Torque of a Transverse Flux Machine [J] . Erich Schmidt IEEE Transactions on Magnetics . 2005,第5期

机译：横向磁通机齿槽转矩的三维有限元分析
2. Torque, Power, Losses, and Heat Calculation of a Transverse Flux Reluctance Machine With Soft Magnetic Composite Materials and Disk-Shaped Rotor [J] . Doering Jan, Steinborn Gunar, Hofmann Wilfried Industry Applications, IEEE Transactions on . 2015,第2期

机译：具有软磁复合材料和盘形转子的横向磁通磁阻电机的转矩，功率，损耗和热量计算
3. Torque characteristics of high torque density partitioned PM consequent pole flux switching machines with flux barriers [J] . Wasiq Ullah, Faisal Khan, Erwan Sulaiman, CES Transactions on Electrical Machines and Systems . 2020,第2期

机译：高扭矩密度的扭矩特性分区PM随后的极磁通开关机助焊剂屏障
4. Optimization of magnetic flux paths in transverse flux machines through the use of iron wire wound materials [C] . Artur Giedymin, Théodore Cherriére, Fatih Avcilar, IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drive . 2019

机译：使用铁丝缠绕材料优化横向磁通机中的磁通路径
5. Modeling and Analysis of High Torque Density Transverse Flux Machines for Direct-Drive Applications [D] . Hasan, Iftekhar. 2017

机译：用于直接驱动的高转矩密度横向磁通机的建模与分析
6. The Effects of Cogging Torque Reduction in Axial Flux Machines [O] . Samuel Mengesha, Shailendra Rajput, Simon Lineykin, 2021

机译：齿槽扭矩减小的影响轴向磁通机
7. 3-D eddy current and fringing-flux distribution in an axial-flux permanent-magnet synchronous machine with stator in laminated iron or SMC [O] . Scheerlinck Bart, De Gersem Herbert, Sergeant Peter 2015

机译：定子铁芯或SMC轴流永磁同步电机的3-D涡流和磁通分布
8. Digital signal processing control of induction machine's torque and stator flux utilizing the direct stator flux field orientation method [R] . Seiz, J. B. 1997

机译：利用直接定子磁场定向法对感应电机的转矩和定子磁链进行数字信号处理控制

High Torque Density Transverse Flux Machine Without the Need to Use SMC Material for 3-D Flux Paths

摘要

著录项

相似文献

相关主题

期刊订阅