Frequency tuning in SAW (surface acoustic wave) resonator-stabilized oscillators is normally accomplished via utilization of a voltage-controlled phase shifter. The design of abrupt junction varactor diode-inductor networks which employ impedance transformation techniques to obtain linear frequency tuning of two-port SAW resonators is reported. The approach is similar to that previously developed for linear tuning of bulk wave, quartz crystal resonators. This technique uses varactor diode parallel inductance to provide a linear reactance versus voltage network, which is effectively connected in series with the resonator motional impedance in order to tune the effective resonator center frequency. Typical tuning ranges are significantly larger than those achievable using the phase shifter approach, and are on the order of 400 ppm for the 320-MHz resonator used.
展开▼
