首页> 外文期刊>IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control >Use of ferroelectric-crystal detectors for electron dosimetry
【24h】

Use of ferroelectric-crystal detectors for electron dosimetry

机译:使用铁电晶体检测器进行电子剂量测定

获取原文
获取原文并翻译 | 示例
           

摘要

A ferroelectric detector system was designed for measurement of dose rate in high-energy electron beams. It was found that a simple lead zirconate-titanate ceramic responds reproducibly to a chopped electron beam by ferroelectric conversion of the resulting pulsed temperature rise to a proportional output voltage. Response as a function of dose rate is linear, the rate of response being a function of incident energy. As a calorimetric dose-rate meter the detector is responsive with response improving as energy is reduced. The detector can be used over a broad range of energies not usually accessible with a single detector.
机译:设计了铁电探测器系统,用于测量高能电子束中的剂量率。已经发现,简单的锆钛酸铅陶瓷通过将产生的脉冲温度升高铁电转换为成比例的输出电压,可对切碎的电子束产生可重复的响应。作为剂量率函数的响应是线性的,响应率是入射能量的函数。作为量热剂量率计,检测器对能量的降低具有响应性,并且响应性得到了改善。该检测器可以在通常单个检测器无法获得的广泛能量范围内使用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号