...
首页> 外文期刊>電気学会論文誌 D:產業応用部門誌 >不平衡三相三線式交流の線間電圧に基づく星形電圧と零相分電圧の瞬時値導出法と三相PWMコンバータ制御への応用
【24h】

不平衡三相三線式交流の線間電圧に基づく星形電圧と零相分電圧の瞬時値導出法と三相PWMコンバータ制御への応用

机译:基于不平衡三相三线交流线路电压的星形电压和零相电压瞬时值推导及其在三相PWM变换器控制中的应用

获取原文
获取原文并翻译 | 示例
           

摘要

In general, voltage imbalances in 3-phase AC power systems are inevitable. 3-Phase PWM (Pulse Width Modulation) converter used in 3-wire systems are generally designed for use under limited imbalances of input voltages, and problems such as input current distortion, deterioration of output properties, degradation of efficiency and failure may occur in some cases.rnThese problems cause severe damages to industries in some cases, for example, semiconductor production machines: SEMI defined "SEMI F47-0200" and "SEMI F47-0706" standards that have to be satisfied to realize voltage sag immunity. In order to compensate the remained problems due to the unbalanced input voltages, particular storage devices are designed additionally for conventional converters. This paper proposes that the determination of both the instantaneous zero-phase sequence voltage and wye voltages is essential for 3-phase PWM converter control used for a 3-wire system to keep its output rated under occasional or long-term voltage imbalances in an AC system. This paper also describes a general new method to derive the components of the voltages of instantaneous wye and zero-phase sequence voltage from line-line voltages of a 3-wire system. This paper also describes a method to apply the voltages to control the converter. The results obtained on implementation verify that this new converter keeps its output rated under unbalanced conditions wider than those defined by SEMIs without particular storage devices as far as the AC voltages are remained live.%1.はじめに三相交流は単相負荷の投入や切断あるいは外的な影響等により,瞬時あるいは継続的な三相電圧の不平衡低下は避け難い状況にあると言える。このため,三相PWMコンバータは関連して派生する入力電流歪や出力に関する特性悪化,効率低下,動作不良等への対策が求められて来た。 ちなみに不平衡の一形態と言える瞬時電圧低下(瞬低)に関しては,生産ラインや加工品に過大な影響を受ける半導体製造装置用電源について,規格「SEMIF47-0200」り),「SEMIF47-0706」(2)が定められている。
机译:通常,三相交流电源系统中的电压不平衡是不可避免的。 3线制系统中使用的三相PWM(脉宽调制)转换器通常设计用于有限的输入电压不平衡情况,某些情况下可能会出现诸如输入电流失真,输出特性下降,效率下降和故障等问题。这些问题在某些情况下会对工业造成严重损害,例如,半导体生产机器:SEMI定义了“ SEMI F47-0200”和“ SEMI F47-0706”标准,必须满足这些标准才能实现抗电压骤降的能力。为了补偿由于不平衡的输入电压而引起的剩余问题,另外为常规转换器设计了特定的存储设备。本文建议确定瞬时零相序列电压和星形电压对于用于3线系统的3相PWM转换器控制至关重要,以便在交流中偶尔或长期出现电压不平衡的情况下保持其输出额定值系统。本文还描述了一种通用的新方法,该方法可从3线系统的线路电压中导出瞬时Wye电压和零相序电压的分量。本文还介绍了一种施加电压以控制转换器的方法。在实施中获得的结果证明,只要交流电压保持带电状态,这种新型转换器就可以在不平衡条件下的输出额定值比没有特殊存储设备的SEMI定义的宽得多。%1。 。不平衡の一形态と言える瞬间电圧低下(瞬变)に关しては,生产ラインや加工品に过大な影响を受ける半导体制造的特性悪化,效率低下,动作不良等へ装置用电源について,规格「SEMIF47-0200」り),「SEMIF47-0706」(2)が定められている。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号