首页> 外文期刊>International Journal on Communications Antenna and Propagation >MIMO Antenna for IEEE 802.1 lac with Cross-Polarized Circular Configuration of Printed Yagi Elements
【24h】

MIMO Antenna for IEEE 802.1 lac with Cross-Polarized Circular Configuration of Printed Yagi Elements

机译:用于IEEE 802.1 LAC的MIMO天线,具有印刷YAGI元素的交叉偏振圆形配置

获取原文
获取原文并翻译 | 示例
           

摘要

Antennas characteristics contribute significantly to Multiple Input Multiple Output (MIMO) system performances. IEEE 802.11ac is a wireless technology standard supporting transmission data rate of up to 1 Gbps by implementing the MIMO system. The design of the antenna should be capable to support the achievement of high channel capacity. This paper proposes the design of MIMO antenna for IEEE 802.1 lac access point. The proposed MIMO antenna is composed of eight Printed Yagi elements, and each one has a bandwidth covering the frequency band of the IEEE 802.1 lac system. In order to ensure a low coupling level between elements, the cross-polarized arrangement is used. In order to achieve good coverage for the area around the access point, the circular arrangement of Printed Yagi elements has been chosen as the solution referring to the problem. Computer simulations and laboratory measurements have been performed in achieving the design of the proposed antenna. Simulation and measurement results show that the proposed MIMO antenna has been able to support channel capacity of up to 1 Gbps at the low Signal to Noise Ratio (SNR) conditions of 10 dB.
机译:天线特性对多输入多输出(MIMO)系统性能有显着贡献。 IEEE 802.11AC是一种通过实现MIMO系统提供高达1 Gbps的无线技术标准标准。天线的设计应该能够支持高通道容量的实现。本文提出了IEEE 802.1 LAC接入点的MIMO天线的设计。所提出的MIMO天线由八个印刷的yagi元件组成,每个元件具有覆盖IEEE 802.1 LAC系统的频带的带宽。为了确保元件之间的低耦合电平,使用交叉极化布置。为了实现接入点周围的区域的良好覆盖,已选择印刷的YAGI元件的圆形布置作为提及问题的解决方案。在实现所提出的天线的设计时已经进行了计算机模拟和实验室测量。仿真和测量结果表明,所提出的MIMO天线能够在低信噪比(SNR)条件下支持高达1 Gbps的信道容量为10 dB。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号