...
首页> 外文期刊>International Journal of Microwave and Wireless Technologies >Design and analysis of a planar UWB bandpass filter with stopband characteristics using MMR technique
【24h】

Design and analysis of a planar UWB bandpass filter with stopband characteristics using MMR technique

机译:使用MMR技术实现具有阻带特性的平面UWB带通滤波器的设计与分析

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, a ultra-wideband (UWB) bandpass filter with stopband characteristics is presented using a multi-mode resonator (MMR) technique. An MMR is formed by loading three dumbbell-shaped (Mickey and circular) shunt stubs placed in the center and two symmetrical locations from ports, respectively. Three circular and arrowhead defected ground structures on the ground plane are introduced to achieve UWB bandwidth with a better roll-off rate. The proposed filter exhibits stopband characteristics from 10.8 to 20 GHz with a 0.4 dB return loss. The group delay and roll-off rate of the designed filter are 0.30 ns in the passband and 16 dB/GHz at lower and higher cut-off frequencies, respectively. The dimension of the filter is 0.74 lambda(g) x 0.67 lambda(g) mm(2) and was fabricated on a cost-effective substrate. All simulated results are verified through the experimental results.
机译:在本文中,使用多模谐振器(MMR)技术呈现具有阻带特性的超宽带(UWB)带通滤波器。 通过将三个哑铃形(云匙和圆形)分流支柱装载在中心和来自端口的两个对称位置来形成MMR。 引入了三个圆形和箭头偏转的地面结构,以实现具有更好滚动速率的UWB带宽。 所提出的滤波器从10.8到20 GHz的截止空间特性具有0.4dB回波损耗。 设计过滤器的组延迟和折腾速率分别在通带中和16dB / GHz的较低和较高的截止频率下。 过滤器的尺寸为0.74λ(g)×0.67λ(g)mm(2),并在经济高效的基材上制造。 所有模拟结果都通过实验结果进行了验证。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号