RECRYSTALLIZATION PROCESSES IN AUSTENITIC ALLOY PRODUCED BY SELECTIVE LASER MELTING

K. O. Bazaleeva; E. V. Tsvetkova; E. V. Balakirev

首页> 外文期刊>International journal of nanomechanics science and technology >RECRYSTALLIZATION PROCESSES IN AUSTENITIC ALLOY PRODUCED BY SELECTIVE LASER MELTING

【24h】

RECRYSTALLIZATION PROCESSES IN AUSTENITIC ALLOY PRODUCED BY SELECTIVE LASER MELTING

机译：选择性激光熔炼生产奥氏体合金的再结晶过程

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

The thermal stability of the austenitic Fe-17%Cr-12%Ni-2%Mo-1%Mn-0.7%Si-0.02%C alloy, produced by selective laser melting, was investigated. It is shown that the cellular structure is retained in the alloy up to 800℃. With further increase in the annealing temperature, the dislocation structure of the alloy changes (800-950°) and the solid solution supersaturated with atmosphere atoms decomposes (1050-1150°).

机译：研究了通过选择性激光熔化生产的奥氏体Fe-17％Cr-12％Ni-2％Mo-1％Mn-0.7％Si-0.02％C合金的热稳定性。结果表明，在高达800℃的温度下，合金中都保留了孔结构。随着退火温度的进一步升高，合金的位错结构发生变化（800-950°），被大气原子过饱和的固溶体分解（1050-1150°）。

著录项

来源
《International journal of nanomechanics science and technology》 |2014年第4期|313-322|共10页
作者
K. O. Bazaleeva; E. V. Tsvetkova; E. V. Balakirev;
展开▼
作者单位

N. E. Bauman Moscow State Technical University, Moscow, Russia;

JSC All-Russia Research Institute of Inorganic Materials, Moscow, Russia;

Federal State Unitary Enterprise PGUP All-Russian Institute of Aviation Materials, Moscow, Russia;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类
关键词
selective laser melting; thermal stability; austenitic alloy;

机译：选择性激光熔化热稳定性;奥氏体合金;

相似文献

外文文献
中文文献
专利

1. The effects of hot isostatic pressing (HIP) and solubilization heat treatment on the density, mechanical properties, and microstructure of austenitic stainless steel parts produced by selective laser melting (SLM) [J] . Liverani Erica, Lutey Adrian H. A., Ascari Alessandro, The International Journal of Advanced Manufacturing Technology . 2020,第1a2期

机译：热等静压（臀部）和溶解热处理对通过选择性激光熔化（SLM）产生的奥氏体不锈钢部件密度，力学性能和微观结构的影响
2. Structure and mechanical properties of austenitic 316L steel produced by selective laser melting [J] . P. A. Kuznetsov, A. A. Zisman, S. N. Petrov, Russian Metallurgy(Metally) . 2016,第10期

机译：选择性激光熔化产生的奥氏体316L钢的结构和力学性能
3. Thermal Stability of the Cellular Structure of an Austenitic Alloy after Selective Laser Melting [J] . K. O. Bazaleeva, E. V. Tsvetkova, E. V. Balakirev Russian Metallurgy(Metally) . 2016,第5期

机译：选择性激光熔化后奥氏体合金细胞结构的热稳定性
4. Physical, Metallurgical and Mechanical Characterization of an Austenitic Stainless Steel Produced by Selective Laser Melting [C] . T.Baffie, M.Boidot, S.Chomette, Euro PM2017 congress amp; exhibition proceedings . 2017

机译：选择性激光熔炼生产的奥氏体不锈钢的物理，冶金和机械特性
5. Physics-based simulation modeling and optimization of microstructural changes induced by machining and selective laser melting processes in titanium and nickel based alloys. [D] . Arisoy, Yigit Muzaffer. 2016

机译：基于物理的仿真建模和优化的钛和镍基合金的机械加工和选择性激光熔化过程引起的微观结构变化。
6. The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting [O] . Yen-Ling Kuo, Toshiki Nagahari, Koji Kakehi 2018

机译：后处理对选择性激光熔化建立的718合金的组织和蠕变性能的影响
7. Processes of Recrystallization in Austenitic Alloy Obtained by Methods of Selective Laser Melting [O] . К.О. Базалеева, Е.В. Цветкова, Э.В. Балакирев 2016

机译：通过选择性激光熔化方法获得的奥氏体合金中重结晶的方法

RECRYSTALLIZATION PROCESSES IN AUSTENITIC ALLOY PRODUCED BY SELECTIVE LASER MELTING

摘要

著录项

相似文献

相关主题

期刊订阅