首页> 外文期刊>International journal of RF and microwave computer-aided engineering >A new compact microstrip dual bandpass filter using stepped impedance and λ/2 bended resonators
【24h】

A new compact microstrip dual bandpass filter using stepped impedance and λ/2 bended resonators

机译:使用阶梯式阻抗和λ/ 2弯曲谐振器的新的紧凑型微带双带通滤波器

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, a compact dual-band bandpass filter (DB-BPF) is implemented by using a pair of coupled stepped impedance resonators (SIRs) and a pair of λ/2 bended resonators for the modern wireless communication systems such as WiMAX and WLAN (3.4 and 5.4-GHz). The physical layout is presented and explained the establishment of an LC equivalent circuit. Moreover, the second passband of the proposed dual-band bandpass filter can be independently controlled by inserting the open-circuited stubs at the end of the λ/2 bended resonators without increasing the circuit size. Simulation results show that the second passband can be ranged from 5.6 to 4.8-GHz with the bandwidth of 400 ± 96-MHz, whereas the first passband is fixed with the bandwidth of 280 ± 8.5-MHz. The measured results exhibit the insertion losses (S21) lower than 1.2 and 1.4 dB, and the return losses (S11) of −23 and −32 dB at the first and second passbands, respectively, which show a good agreement with simulation results. The dual-band microstrip filter is fabricated on RT/Rogers 4003 substrate with a compact size of 0.24λ_g × 0.25λ_g.
机译:在本文中,通过使用一对耦合的阶梯式阻抗谐振器(SIR)和一对λ/ 2弯曲的谐振器来实现紧凑的双频带布通滤波器(DB-BPF),以及用于现代无线通信系统,例如WiMAX和WLAN (3.4和5.4 GHz)。提出了物理布局并解释了LC等效电路的建立。此外,所提出的双频带通滤波器的第二通带可以通过在λ/ 2弯曲的谐振器的末端插入不增加电路尺寸的λ/ 2弯曲的谐振器的末端插入开口循环的短截线来独立地控制。仿真结果表明,第二通带可以从5.6到4.8-GHz,带宽为400±96-MHz,而第一个通带是固定的,带宽为280±8.5-mHz。测量结果表现出低于1.2和1.4dB的插入损耗(S21),以及第一和第二通带的-23和-32dB的返回损耗(S11),其显示出与模拟结果的良好一致性。双频带微带滤波器在RT / ROGERS 4003基板上制造,具有0.24λ_g×0.25λ_g的紧凑尺寸。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号