Inclusioon Particle growth during solidification of Stainless Steel

Mikio Suzuki; Ryuji Yamaguchi; Katsuhiko Murakami

首页> 外文期刊>ISIJ international >Inclusioon Particle growth during solidification of Stainless Steel

【24h】

Inclusioon Particle growth during solidification of Stainless Steel

机译：不锈钢凝固过程中包含的颗粒生长

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Inclusion particles in stainless steel were investigated in continuously cast slabs in a full scale caster and ingots cast in several kinds of molds under laboratory conditions. Under such conditions particle size near slab surfaces was seen to be smaller. However, tit was increasing with increasing depth going into the slab interior. In order to understand the mechanism of inclusion particle growth we applied four different mathe- matical models to predict the size distribution of particles.

机译：在实验室条件下，在全尺寸连铸机的连续铸坯中研究了不锈钢中的夹杂物颗粒，并在几种模具中铸造了钢锭。在这种条件下，板坯表面附近的粒径较小。但是，随着进入板坯内部深度的增加，山雀也随之增加。为了理解夹杂物颗粒生长的机理，我们应用了四种不同的数学模型来预测颗粒的尺寸分布。

著录项

来源
《ISIJ international》 |2001年第3期|p.247-256|共10页
作者
Mikio Suzuki; Ryuji Yamaguchi; Katsuhiko Murakami;
展开▼
作者单位

展开▼
收录信息美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
原文格式 PDF
正文语种 eng
中图分类黑色金属材料;钢铁冶炼（黑色金属冶炼）（总论）;
关键词
inclusion; size; pparticle;

机译：包含尺寸;粒子;

相似文献

外文文献
中文文献
专利

1. Growth of inclusion particles during solidification of stainless steel [J] . 铃木干雄, 中田正之材料とプロセス: 日本鉄鋼協会講演論文集 . 1999,第4期

机译：不锈钢凝固过程中夹杂物颗粒的生长
2. Growth of inclusion particles during solidification of stainless steel [J] . 铃木干雄, 中田正之材料とプロセス: 日本鉄鋼協会講演論文集 . 1999,第4期

机译：不锈钢凝固过程中包涵体的生长
3. Solidification and transformation behaviour of austenitic stainless steel weld metals solidified as primary ferrite: study of solidification and subsequent transformation of Cr-Ni stainless steel weld metals (2nd report) [J] . H. Inoue, T. Koseki, S. Okita, Welding Research Abroad . 1998,第3期

机译：固化为原始铁素体的奥氏体不锈钢焊缝金属的凝固和相变行为：Cr-Ni不锈钢焊缝金属的凝固和相变的研究（第二次报告）
4. Austenite Grain Growth in a Low Carbon Si-Mn Steel with Ti Oxide Particles Formed through Solidification of Undercooled Molten Steel [C] . H. Nakajima, N. Sakuma, K. Nagai, Fourth International Conference on Recrystallization and Related Phenomena, Jul 13-16, 1999, Tsukuba City, Japan . 1999

机译：过冷钢水凝固形成的具有氧化钛颗粒的低碳硅锰钢中的奥氏体晶粒长大
5. Rapid Solidification of Austenitic Stainless Steels by Splat Quenching [D] . Morales, Sydney Mackenzie. 2020

机译：SPLAT淬火快速凝固奥氏体不锈钢
6. A New Test Method for Evaluation of Solidification Cracking Susceptibility of Stainless Steel during Laser Welding [O] . Wenbin Wang, Li Xiong, Dan Wang, 2020

机译：激光焊接期间不锈钢凝固裂缝敏感性评价的新试验方法
7. Study on Solidification and Subsequent Transformation of Cr-Ni Stainless Steel Weld Metals (Report 1). Solidification and Transformation Behavior of Austenitic Stainless Steel Weld Metals Solidified as Primary Austenite. [O] . Hiroshige Inoue, Toshihiko Koseki, Shigeru Ohkita, 1997

机译：CR-NI不锈钢焊接金属凝固及随后转化研究（报告1）。原发性奥氏体固化的奥氏体不锈钢焊接金属的凝固与转化行为。
8. Pre-Irradiation Spatial Distribution and Stability of Boride Particles in Rapidly Solidified Boron-Doped Stainless Steels [R] . Kanani, N., Arnberg, L., Harling, O. K. 1981

机译：快速凝固硼掺杂不锈钢中硼化物颗粒的预辐射空间分布和稳定性

Inclusioon Particle growth during solidification of Stainless Steel

摘要

著录项

相似文献

相关主题

期刊订阅