...
首页> 外文期刊>Japanese journal of applied physics >Dielectric and Piezoelectric Characteristics in Lead-Free Lix(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 Piezoelectric Ceramics Prepared by Two-Step Calcination Method
【24h】

Dielectric and Piezoelectric Characteristics in Lead-Free Lix(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 Piezoelectric Ceramics Prepared by Two-Step Calcination Method

机译:两步煅烧法制备无铅Lix(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3压电陶瓷的介电和压电特性

获取原文
获取原文并翻译 | 示例
           

摘要

Lead-free Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 piezoelectric ceramics samples prepared by the conventional solid-state reaction and two-step calcination method were achieved and compared. The effects of the amount of Li_2O_3 on the phase structure, microstructure, dielectric, and piezoelectric properties of Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 ceramics samples were systematically discussed and investigated. It was found that the Li_2O_3 content in Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 ceramics samples strongly affects the structure and electrical properties. For the two-step calcination method, the lead-free ceramics samples exhibited excellent dielectric and piezoelectric properties. The relative dielectric constant (ε_r) and loss tangent (tan δ) of the lead-free Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 piezoelectric ceramics samples for x = 0.03 compositions prepared by the two-step calcination method were 1223 and 0.021, respectively, in addition, the electromechanical coupling factor (k_P) and Curie temperature (T_c) were 48.5% and 315℃, respectively. These results show that Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3 ceramics samples are promising candidates for lead-free piezoelectric materials.
机译:获得了通过常规固相反应和两步煅烧方法制备的无铅Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3压电陶瓷样品并进行比较。 Li_2O_3的含量对Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3陶瓷样品的相结构,微观结构,介电常数和压电性能的影响被系统地讨论和调查。发现Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3陶瓷样品中的Li_2O_3含量强烈影响结构和电性能。对于两步煅烧方法,无铅陶瓷样品表现出优异的介电和压电性能。无铅Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3压电陶瓷样品的相对介电常数(ε_r)和损耗角正切(tanδ)对于x = 0.03,通过两步煅烧方法制备的组合物分别为1223和0.021,此外,机电耦合因子(k_P)和居里温度(T_c)分别为48.5%和315℃。这些结果表明,Li_X(K_(0.5)Na_(0.5))_(1-x)(Nb_(0.8)Ta_(0.2))O_3陶瓷样品是无铅压电材料的有希望的候选者。

著录项

  • 来源
    《Japanese journal of applied physics》 |2012年第9issue3期|09MD11.1-09MD11.5|共5页
  • 作者单位

    Department of Electronics Engineering and Computer Science, Tung-Fang Design University, Kaohsiung 829, Taiwan, R.O.C.;

    Department of Electronic Engineering, Southern Taiwan University, Tainan 700, Taiwan, R.O.C.;

    Department of Mathematics and Physics, Chinese Air Force Academy, Kangshan, Kaohsiung 804, Taiwan, R.O.C.;

    Department of Physics, Military Academy, Fengshan, Kaohsiung 830, Taiwan, R.O.C.;

    Department of Electronic Engineering, Southern Taiwan University, Tainan 700, Taiwan, R.O.C.;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号