首页> 外文期刊>Journal of Environmental Science and Health >Treatment of fertilizer industry wastewater by catalytic peroxidation process using copper-loaded SBA-15
【24h】

Treatment of fertilizer industry wastewater by catalytic peroxidation process using copper-loaded SBA-15

机译:负载铜的SBA-15催化过氧化工艺处理化肥工业废水

获取原文
获取原文并翻译 | 示例
           

摘要

The present study reports use of the catalytic peroxidation (CPO) method for treatment of actual fertilizer industry wastewater (FIW) by using copper-loaded Santa Barbara amorphous-15 (Cu/SBA-15) catalyst. FIW consists of toxic nitrogenous and phosphorus containing compounds that are not easily degraded by the conventional physicochemical and biological treatment methods. In the present study, Box-Behnken (BB) experimental design methodology was used for optimization of three independent parameters namely catalytic dose (m), initial pH (pH(o)), and H2O2 concentration. Maximum 83% COD removal was obtained at m = 4.5g L-1, pH(o) = 9.2 and H2O2 concentration = 2.0mL L-1. Wastewater and catalyst recovered at optimum treatment condition were characterized by various techniques. UV-visible and Fourier transform infrared (FTIR) techniques were used for understanding the treatment mechanism. Textural and thermogravimetric (TGA/DTA) analysis were used for determining the characteristic of catalyst before and after treatment. The stability and performance of the Cu/SBA-15 catalyst was also determined by using the reusability tests.
机译:本研究报告通过使用负载铜的圣塔芭芭拉无定形15(Cu / SBA-15)催化剂,使用催化过氧化(CPO)方法处理实际的肥料工业废水(FIW)。 FIW由有毒的含氮和含磷化合物组成,这些化合物不易通过常规的物理化学和生物处理方法降解。在本研究中,Box-Behnken(BB)实验设计方法用于优化三个独立参数,即催化剂量(m),初始pH(pH(o))和H2O2浓度。在m = 4.5 g L-1,pH(o)= 9.2和H2O2浓度= 2.0mL L-1时,最大去除了83%的COD。通过各种技术对在最佳处理条件下回收的废水和催化剂进行了表征。使用紫外可见光和傅立叶变换红外(FTIR)技术了解治疗机理。使用质地和热重分析(TGA / DTA)来确定催化剂在处理前后的特性。 Cu / SBA-15催化剂的稳定性和性能也通过可重复使用性测试确定。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号