首页> 外文期刊>Journal of Materials Engineering and Performance >The Effect of Fuel Types on Porous Alumina Produced via Soft Combustion Reaction for Implant Applications
【24h】

The Effect of Fuel Types on Porous Alumina Produced via Soft Combustion Reaction for Implant Applications

机译:燃料类型对植入应用中软燃烧反应产生的多孔氧化铝的影响

获取原文
获取原文并翻译 | 示例
           

摘要

This article describes the effects of fuel types on the porous structure of alumina produced using a soft combustion reaction. There are several combustion parameters that could affect the porous structure of the alumina produced such as fuel-to-oxidizer ratios, ignition temperature, and type of fuels. In this study, the effect of fuel types on alumina properties was studied. Citric acid, glycine, and urea were used as fuels along with aluminum nitrate as an oxidizer. The properties of porous alumina produced using three different fuels were compared to determine the optimum fuel that could produce the best properties for implant applications. X-ray diffraction analysis showed that single-phase alumina powder was obtained in all samples. Morphology observation using scanning electron microscope (SEM) on sintered bodies showed open pores which had potential to be used in implant applications. Porous alumina produced using glycine as fuel (AG) showed the best properties; high surface area of 8.7 m2/g, porosity of 70% and sintered density 1.37 g/cm3.
机译:本文介绍了燃料类型对使用软燃烧反应生产的氧化铝多孔结构的影响。有几种燃烧参数可能会影响所生产氧化铝的多孔结构,例如燃料与氧化剂的比例,着火温度和燃料类型。在这项研究中,研究了燃料类型对氧化铝性能的影响。柠檬酸,甘氨酸和尿素被用作燃料,硝酸铝被用作氧化剂。比较了使用三种不同燃料生产的多孔氧化铝的性能,以确定可以为植入物应用产生最佳性能的最佳燃料。 X射线衍射分析表明,在所有样品中均获得了单相氧化铝粉末。使用扫描电子显微镜(SEM)在烧结体上的形态观察表明,开孔具有潜在的潜力,可用于植入应用。使用甘氨酸作为燃料(AG)生产的多孔氧化铝具有最佳性能;高表面积8.7 m 2 / g,孔隙率70%,烧结密度1.37 g / cm 3

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号