首页> 外文期刊>Journal of Materials Engineering and Performance >Studies on Hot Corrosion of the Microstructurally Different Regions of 2.25Cr-1Mo (T22) Boiler Tube Steel Weldment
【24h】

Studies on Hot Corrosion of the Microstructurally Different Regions of 2.25Cr-1Mo (T22) Boiler Tube Steel Weldment

机译:2.25Cr-1Mo(T22)锅炉管钢焊缝微观结构不同部位的热腐蚀研究

获取原文
获取原文并翻译 | 示例
           

摘要

This study examines the effect of microstructurally different regions on the hot corrosion of tungsten inert gas weldment in 2.25Cr-1Mo (T22) boiler tube steel. Various regions of weldment were oxidized in molten salt Na2SO4-60% V2O5 environment at 900 °C. The base metal was found to oxidize at much higher rates than the weld metal and the heat-affected zone. Oxide scales formed in the three regions were compared by scanning electron microscopy with energy dispersive of X-ray analysis, X-ray diffraction pattern, and electron probe microanalysis. The research investigates the formation of inner scales with free Cr over the HAZ.
机译:本研究研究了微观结构不同区域对2.25Cr-1Mo(T22)锅炉管钢中钨极惰性气体保护焊件热腐蚀的影响。在900°C的熔融盐Na2 SO4 -60%V2 O5 环境中,焊件的各个区域均被氧化。发现贱金属的氧化速率远高于焊缝金属和热影响区。通过扫描电子显微镜,X射线分析的能量分散,X射线衍射图和电子探针显微分析,比较了在这三个区域中形成的氧化皮。该研究调查了热影响区上带有游离铬的内部水垢的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号