首页> 外文期刊>Journal of Materials Engineering and Performance >Determinations of the non-recrystallization temperature for X52 steel produced by compact slab process combined with direct hot rolling
【24h】

Determinations of the non-recrystallization temperature for X52 steel produced by compact slab process combined with direct hot rolling

机译:紧凑板坯工艺与直接热轧相结合生产的X52钢的非再结晶温度的确定

获取原文
获取原文并翻译 | 示例
           

摘要

Deformation comprises not only dimensional accuracy but also the control of the final microstructure and mechanical properties. Deformation below the non-recrystallization temperature (T nr) is important to design the proper rolling schedule to avoid grain growth in the final stages of rolling. The determination ofT nr for Nb-bearing carbon steel with a compact slab process mill log is carried out depending upon the Misaka concept calculation. A comparison among different formulas for predicting theT nr was conducted using Misaka, Bratto, and Jonas equations. The Misaka equation depends on the chemical compositions and deformation parameters including dynamic and metadynamic recrystallization. The Bratto equation considers only the steel chemical composition. The Jonas equation depends only on the accumulated strain. The Bratto equation gives a large value ofT nr, while the Misaka equations show a moderate and accurate value in relation to the Jonas results, which depend on torsion tests. The effect of strain accumulation on dynamic recrystallization is investigated to predict the final grain size of ferrite.
机译:变形不仅包括尺寸精度,还包括对最终微观结构和机械性能的控制。低于非重结晶温度(T nr )的变形对于设计适当的轧制方案以避免在轧制的最后阶段晶粒长大很重要。根据Misaka概念的计算,用紧凑的板坯工艺轧机测井法确定含Nb的碳钢的T nr 。使用Misaka,Bratto和Jonas方程对用于预测T nr 的不同公式进行了比较。 Misaka方程取决于化学成分和变形参数,包括动态和亚动态重结晶。 Bratto方程仅考虑钢的化学成分。乔纳斯方程仅取决于累积应变。 Bratto方程的T nr 值较大,而Misaka方程的Jonas结果则显示出适中且准确的值,这取决于扭转试验。研究了应变积累对动态再结晶的影响,以预测铁素体的最终晶粒尺寸。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号