Thick YBCO and Y_(0.5)RE_(0.5)BCO Coated Conductor by Sol-Gel Dip Coating Process

Z. Aslanoglu; T. Kuecuekoemeroglu; L. Arda; Y. Akin; Y. S. Hascicek

首页> 外文期刊>Key Engineering Materials >Thick YBCO and Y_(0.5)RE_(0.5)BCO Coated Conductor by Sol-Gel Dip Coating Process

【24h】

Thick YBCO and Y_(0.5)RE_(0.5)BCO Coated Conductor by Sol-Gel Dip Coating Process

机译：溶胶-凝胶浸涂法制备厚YBCO和Y_（0.5）RE_（0.5）BCO涂层导体

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

The thick films of YBCO and Y_(0.5)RE_(0.5)BCO (RE=Er, Yb, Sm, Ho) on YSZ buffer layered flexible Ni tape by sol-gel dip coating process has been investigated. The sol-gel dip coating process was used to prepare both superconductive film and YSZ buffer layer on flexible cube textured Ni tape. SEM, EDS, and XRD analysis were used to characterize the superconducting coated conductor. The films produced in this manner were dense and free of cracks. The I_c enhancement was obtained by Yb and Er substitution for Y by sol-gel dip coating process.

机译：通过溶胶-凝胶浸涂工艺研究了YSZ缓冲层状柔性Ni带上的YBCO和Y_（0.5）RE_（0.5）BCO（RE = Er，Yb，Sm，Ho）的厚膜。溶胶-凝胶浸涂法用于在柔性立方织构镍带上制备超导膜和YSZ缓冲层。 SEM，EDS和XRD分析用于表征超导涂层导体。以这种方式生产的膜致密且无裂纹。通过溶胶-凝胶浸涂法通过Yb和E取代Y获得I_c增强。

著录项

来源
《Key Engineering Materials》 |2004年第pt1期|p.617-620|共4页
作者
Z. Aslanoglu; T. Kuecuekoemeroglu; L. Arda; Y. Akin; Y. S. Hascicek;
展开▼
作者单位

NHMFL, Florida State University, 1800 E. Paul Dirac Dr., Tallahassee, FL, 32310, USA;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类工程基础科学;
关键词
superconductor; sol-gel; YBCO; rare earth substitution;

机译：超导体;溶胶-凝胶;YBCO;稀土替代;

相似文献

外文文献
中文文献
专利

1. Compositing protonic conductor BaZr_(0.5)Y_(0.5)O_3 (BZY) with triple conductor BaCo_(0.4)Fe_(0.4)Zr_(0.1)Y_(0.1)O_(3-δ) (BCFZY) as electrolyte for advanced solid oxide fuel cell [J] . He Zili, Nie Jingjing, Liu Kai, International journal of hydrogen energy . 2021,第15期

机译：用三体导体Baco_（0.4）Fe_（0.4）Zr_（0.1）Zr_（0.1）y_（0.1）y_（0.1）O_（3-δ）（BCFZY）作为高级固体氧化物燃料的电解质，为电解质组成质子导体Bazr_（0.5）y_3（BZY）细胞
2. Influence of the low oxygen partial pressures on thick YBCO coated conductor by sol-gel process [J] . Aslanoglu Z., Akin Y., El-Kawni MI., Physica, C. Superconductivity and its applications . 2003,第4期

机译：低氧分压对溶胶-凝胶法厚YBCO涂层导体的影响
3. Phase formation of REBa_2Cu_3O_(7-δ) (RE: Y_(0.5)Gd_(0.5), Y_(0.5)Nd_(0.5), Nd_(0.5)Gd_(0.5)) superconductors from nanopowders synthesised via co-precipitation [J] . M.H. Wahid, Z. Zainal, I. Hamadneh CERAMICS INTERNATIONAL . 2012,第2期

机译：由共沉淀法合成的纳米粉体形成REBa_2Cu_3O_（7-δ）（RE：Y_（0.5）Gd_（0.5），Y_（0.5）Nd_（0.5），Nd_（0.5）Gd_（0.5））超导体的相形成
4. Enhancement of in-field critical current density of BaZrO_3 introduced (Y, Gd)BCO coated conductors by TFA-MOD process adopting multiple-coating with reduced once-coat-layer-thickness [C] . SUZUKI Takumi, OOMURA Syunsuke, IMAMURA Kazutaka, 低温工学·超電導学会会議 . 2017

机译：通过TFA-MOD工艺提高BAZRO_3的现场临界电流密度（y，gd）BCO涂覆的导体，采用多涂层的一次涂层厚度减小
5. Development of nonspiking ohmic contacts to n-Ga(or Al)(0.5)In(0.5)P and low temperature processed ohmic contacts to n-GaAs via solid phase reactions [D] . Hao, Pinghai 1997

机译：通过固相反应开发与n-Ga（或Al）（0.5）In（0.5）P的不尖峰欧姆接触以及对n-GaAs进行低温处理的欧姆接触
6. Structure and Electrical Properties of Na0.5Bi0.5TiO3 Ferroelectric Thick Films Derived From a Polymer Modified Sol-Gel Method [O] . Hongfen Ji, Wei Ren, Lingyan Wang, -1

机译：源自聚合物改性溶胶 - 凝胶法Na0.5Bi0.5TiO3铁电厚膜的结构和电学性质
7. Structure and electrical properties of Na0.5Bi0.5TiO3 ferroelectric thick films derived from a polymer modified sol-gel method [O] . K. K. Shung 2011

机译：Na0.5Bi0.5TiO3衍生自聚合物改性溶胶 - 凝胶法的铁电厚膜的结构和电性能

Thick YBCO and Y_(0.5)RE_(0.5)BCO Coated Conductor by Sol-Gel Dip Coating Process

摘要

著录项

相似文献

相关主题

期刊订阅