Low-NO_x combustion on regenerative burner systems in an industrial furnace

Makoto Nishimura; Dr. Tomio Suzuki; Ryota Nakanishi

首页> 外文期刊>Kobelco Technology Review >Low-NO_x combustion on regenerative burner systems in an industrial furnace

【24h】

Low-NO_x combustion on regenerative burner systems in an industrial furnace

机译：工业炉中再生燃烧器系统上的低NOx燃烧

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

A new type of low-NO_x burner was studied for application to a regenerative burner system in an industrial furnace. The fuel is separately injected at an angle to the axis of the air stream. As a result, mixing of fuel and air is suppressed at the initial stage of combustion, and combustion progresses slowly and steadily. Consequently, very uniform combustion is obtained, self-recirculation of the flue gas is achieved, and emissions of NO_x are considerably reduced, along with a decrease in the quantity of soot produced.

机译：研究了一种新型的低NO_x燃烧器，该燃烧器可用于工业炉中的再生燃烧器系统。燃料以与气流轴线成一定角度的方式分开喷射。结果，在燃烧的初始阶段抑制了燃料和空气的混合，并且燃烧缓慢且稳定地进行。因此，获得了非常均匀的燃烧，实现了烟道气的自我再循环，并且大大减少了NO_x的排放，同时减少了产生的烟尘量。

著录项

来源
《Kobelco Technology Review》 |1997年第20期|p.56-60|共5页
作者
Makoto Nishimura; Dr. Tomio Suzuki; Ryota Nakanishi;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类冶金工业;
关键词

相似文献

外文文献
中文文献
专利

1. Continuous improvements in Industrial Reheating and Heat Treating Furnace combustion systems by Danieli Centra Combustion and Danieli Olivotto Ferre: State-of-the-art Research Centre for combined optimum burner - furnace chamber design with noteworthy performances [J] . E. Mozzi Steel & Metallurgy . 2017,第9期

机译：Danieli Centra Combustion和Danieli Olivotto Ferre的工业再加热和热处理炉燃烧系统的持续改进：最佳最佳燃烧器 - 炉炉设计的最先进的研究中心，具有值得注意的表演
2. LOW-NO_x COMBUSTION UNDER HIGH PREHEATED AIR TEMPERATURE CONDITION IN AN INDUSTRIAL FURNACE [J] . M. NISHIMURA, T. SUZUKI, R. NAKANISHI Energy Conversion & Management . 1997,第10a13期

机译：工业窑炉中高温空气条件下的低NOx燃烧
3. Decision of Arrangement System of Regenerative Burner of Magnesium Reduction Furnace Introduced the High Temperature Air Combustion Technology [J] . Han Sok Hyori, Im Thae Song Kumsok . 2018,第2a220期

机译：镁还原炉再生燃烧器排列系统的决定引入了高温空气燃烧技术
4. Investigation of Gas Flow and Combustion in an Industrial Reheating Furnace Using the Regenerative Burner System [C] . T.Saito, H.Murakami International Conference on Steel Rolling . 1998

机译：使用再生燃烧器系统调查工业再加热炉中的气流和燃烧
5. The modification, design and development of a scaled-down industrial furnace with interchanging burners for academic use [D] . Mendes, Antonio Jose 2010

机译：具有学术用途的可互换燃烧器的按比例缩小的工业炉的改造，设计和开发
6. A Real-Time 3D Measurement System for the Blast Furnace Burden Surface Using High-Temperature Industrial Endoscope [O] . Tianxiang Xu, Zhipeng Chen, Zhaohui Jiang, 2020

机译：使用高温工业内窥镜的高炉炉膛表面实时3D测量系统
7. Burner design for an industrial furnace for thermal post-combustion [O] . Jordan A. Denev, Ilian Dinkov, Henning Bockhorn 2017

机译：热火后燃烧的工业炉的燃烧器设计
8. Modeling Study of Burner and Furnace Performance for Oxygen Enriched Combustion Systems [R] . Payne, R. , Richter, W. 1988

机译：富氧燃烧系统燃烧器和炉膛性能的模拟研究

Low-NO_x combustion on regenerative burner systems in an industrial furnace

摘要

著录项

相似文献

相关主题

期刊订阅