...
首页> 外文期刊>Revue de Metallurgie >Development of a fast annealing/pickling technology for cold rolled stainless steel strips
【24h】

Development of a fast annealing/pickling technology for cold rolled stainless steel strips

机译:冷轧不锈钢带快速退火/酸洗技术的发展

获取原文
获取原文并翻译 | 示例
           

摘要

A new heating technology using the combustion furnace with the impinging flame burners has been developed for annealing the cold rolled stainless steel strips. This technology not only improves the efficiency of the annealing, but also facilitates the descaling after annealing. Annealing and descaling tests made with TP304 stainless steel show that a thinner scale is obtained, which contains more chromium and less silicon, than with conventional heating. The scale film can easily be dissolved by electrolytic pickling.%Un nouveau procédé de chauffage, qui fait appel à un four à flamme directe, a été mis au point pour le recuit de bandes d'acier inoxydable laminées à froid. Le procédé améliore non seulement le rendement au recuit, mais il rend également plus facile le décapage après recuit. Des essais de recuit et de décapage d'acier inoxydable type 304 ont montré qu'il se forme une couche plus mince de calamine, avec une teneur plus élevée en chrome et plus basse en silicium que dans le proc╚é classique. Ce film de calamine peut être éliminé facilement par décapage électrolytique.
机译:已经开发出一种使用带有冲击火焰燃烧器的燃烧炉的新加热技术,用于对冷轧不锈钢带进行退火。该技术不仅提高了退火效率,而且还促进了退火后的除氧化皮。 TP304不锈钢进行的退火和除鳞测试表明,与传统加热方式相比,可以获得更薄的氧化皮,其中包含更多的铬和更少的硅。氧化皮很容易被电解酸洗溶解。%已经开发出一种使用直接火焰炉的新加热工艺,用于冷轧不锈钢带材的退火。该方法不仅提高了退火产量,而且使退火后的酸洗变得更加容易。 304型不锈钢的退火和酸洗测试表明,与传统工艺相比,可以形成更薄的碳层,并具有更高的铬含量和更低的硅含量。可以通过电解酸洗容易地去除该三聚氰胺膜。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号