首页> 外文期刊>Materials Science and Engineering >Twinning and Tripping in 10% Mn steels
【24h】

Twinning and Tripping in 10% Mn steels

机译:10%Mn钢中的孪生和跳闸

获取原文
获取原文并翻译 | 示例
           

摘要

In the present work, a medium Mn, Fe-Mn-C-Al-Si alloy was subjected to different heat treatment conditions and subsequent deformation to understand the effect of these processes on austenite. It was found that, after intercritical annealing, the microstructure was ferrite plus austenite duplex phase (FADP) regardless of cooling rate to room temperature. When cold rolled, the retained austenite of the FADP structures exhibited both twinning and strain induced transformation (SIT) to martensite. A detailed characterization of the co-existence of twinning and SITing after cold rolling is presented.
机译:在目前的工作中,对中等Mn,Fe-Mn-C-Al-Si合金进行不同的热处理条件和随后的变形,以了解这些工艺对奥氏体的影响。发现在临界退火之后,无论冷却至室温的速度如何,显微组织均为铁素体加奥氏体双相(FADP)。冷轧时,FADP结构的残留奥氏体既表现出孪生现象,又表现出应变诱导相变(SIT)转变为马氏体。给出了冷轧后孪晶和SIT并存的详细特征。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号