首页> 外文期刊>Materials Science and Engineering >The high temperature deformation behavior and microstructure of TC21 titanium alloy
【24h】

The high temperature deformation behavior and microstructure of TC21 titanium alloy

机译:TC21钛合金的高温变形行为和组织

获取原文
获取原文并翻译 | 示例
           

摘要

TC21 titanium alloy was hot compressed isothermally at temperatures ranging from 880 ℃ to 950 ℃ and strain rates ranging from 0.01 to 10 s~(-1). Microstructures were investigated by electron backscatter diffraction (EBSD) technique and transmission electron microscopy (TEM), and processing maps were developed at different strains. It is found that strain rate is a key factor for the formation of hot deformation microstructure. The stress-strain curves were exhibited flow softening behavior at high strain rate above 1 s~(-1), while equiaxed grains were found at lower strain rates. There is no large instability zone besides two peak-areas of 880-900℃, 1-10s~(-1) and 925-950℃, 10~(-0.5) to 10s~(-1).
机译:TC21钛合金在880℃至950℃的温度下等温热变形,应变速率在0.01到10 s〜(-1)之间。通过电子背散射衍射(EBSD)技术和透射电子显微镜(TEM)研究了微观结构,并绘制了不同应变下的加工图。发现应变速率是形成热变形微观结构的关键因素。应力-应变曲线在高于1 s〜(-1)的高应变速率下表现出流动软化行为,而在较低应变速率下发现等轴晶。除了两个峰值区域分别为880-900℃,1-10s〜(-1)和925-950℃,10〜(-0.5)至10s〜(-1)之外,没有较大的失稳区域。

著录项

  • 来源
    《Materials Science and Engineering》 |2010年第22期|P.5360-5367|共8页
  • 作者单位

    College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China;

    College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China;

    Beijing Institute of Aeronautical Materials, Beijing 100095, China;

    College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    TC21 alloy; hot deformation; processing map; microstructure;

    机译:TC21合金;热变形加工图;微观结构;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号